|
03-20-2014, 07:58 AM
|
#1
|
Member
Join Date: Jul 2013
Posts: 96
|
A tip to share
Hey. A camper I go with shared this tip
Put one of those rv jacks you know the old fashioned screw top ones. Under the flip out stair.
Greatly reduces wiggle when getting in and out. You just put it under there and snug it up.
|
|
|
03-20-2014, 09:35 AM
|
#2
|
Senior Member
Join Date: May 2012
Location: Minnesota
Posts: 9,769
|
I have seen people use an old scissors jack for a car. This way it is very adjustable, for the variance of the grade.
|
|
|
03-20-2014, 10:13 AM
|
#3
|
Senior Member
Join Date: Jun 2011
Location: Kalamazoo, West Michigan
Posts: 1,817
|
I use a pair of Camco Save-A-Step support jacks on my fold out steps. The steps are only bolted to the floor of the trailer with 2 carriage bolts and I can see them being pulled through the floor by my gravitationally challenged brother in law.
I bought them off Amazon and if I remember correctly are available in a couple of height ranges to accomodate any RV. A very worthwhile investment in my opinion.
__________________
2006 23B Hybrid with 10k round bar WDH
2011 F150 4x4 SCREW Ecoboost, Max Tow, Integrated TBC, 3.73 LS axle, Firestone Ride Rite airbags.
|
|
|
03-20-2014, 02:41 PM
|
#4
|
Senior Member
Join Date: Jan 2014
Location: Greater Grand Rapids
Posts: 1,393
|
Camping World has the step stabilizers for $13.49. Their website says "on line only", but I saw them in my local store today.
__________________
2013 Eagle 266RKS
2011 Ford F-150 w/3.5L Ecoboost & H.D. Tow Package
|
|
|
03-20-2014, 06:06 PM
|
#5
|
Senior Member
Join Date: Jun 2011
Location: Kalamazoo, West Michigan
Posts: 1,817
|
I took the bottom half of the step stabilizer in to work, chucked it up in the lathe and machined the square pad into a circle. It makes it easier to adjust because the corners don't catch on irregularities of the ground...roots, rocks, uneven asphalt. I left the upper part square.
__________________
2006 23B Hybrid with 10k round bar WDH
2011 F150 4x4 SCREW Ecoboost, Max Tow, Integrated TBC, 3.73 LS axle, Firestone Ride Rite airbags.
|
|
|
03-20-2014, 09:02 PM
|
#6
|
Senior Member
Join Date: Feb 2014
Location: Clinton, MT
Posts: 895
|
We use scrap wood or firewood.
__________________
2007 Jayco Jay Flight 26BHS
2016 GMC Duramax Sierra 3500 HD Denali
4 Crown CR-235 6-volt batteries - 470 AH bank
3000 watt Magnum Energy MSH-3012 Tri Metric 2025
Cummins generator
Winegard Traveler DirecTV slimline HD SK-3005
|
|
|
03-20-2014, 10:41 PM
|
#7
|
Senior Member
Join Date: Jan 2012
Location: Lander, Wyoming
Posts: 607
|
I use the little Lynx Levelers on mine.
__________________
2012 GMC 2500HD D/A Crewcab
2012 Jayco Eagle SuperLite HT 26.5 RLS
2009 Crestliner Superhawk 1900
2013 Polaris Sportsman 550 EXP
2008 Polaris Sportsman 700 X2
|
|
|
03-21-2014, 10:32 AM
|
#8
|
Senior Member
Join Date: Nov 2010
Location: Pahrump
Posts: 4,037
|
I've used your camping pal's method.
|
|
|
03-21-2014, 12:30 PM
|
#9
|
Senior Member
Join Date: Sep 2013
Location: South Texas
Posts: 7,216
|
I have the fold down one that screws into the bottom step. I picked it up for about $8 at a PPL tent sale in Houston. I test fitted it, found out it was probably going to be too tall. So since I didn't really pay a whole lot for it, I cut about 1" out of the body, and 1" off the threaded rod. Smoothed off the cut ends, and butted them together with some JB weld and a piece of PVC and some hose clamps. Threaded the rod back in, and I'm GTG!
Looks GREAT and works great too!
__________________
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
|
|
|
03-22-2014, 08:12 PM
|
#10
|
Senior Member
Join Date: Sep 2011
Location: Luray, VA (central Shenandoah Valley of VA)
Posts: 1,430
|
I use a couple of small turnbuckles (like the ones on screen doors that keep the door square) with small flat plates welded on the ends. These are screwed to the step, and are adjustable for the terrain. Total cost was about $2.50 for the pair, plus 10 minutes of time with my welder.
__________________
2003 Ford F-350 V-10 Crew Cab 4WD Long Bed
2004 Jayco Designer Medallion 29 RLTS 5th wheel
Bill, Gayle, Teddy (Jack Russell terrier), and Honey (Beagle)
Retired at last !
Nothing is foolproof to a sufficiently talented fool.
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|