Check your Keyless Entry Panel
There was a stripped screw on our Keyless Entry door panel and I decided to fix it today. After removing the module I could feel a very small amount of moisture in the foam insulation in the door. There was no caulking around the panel and with one of the 2 screws stripped I could understand the moisture. I had just finished washing the trailer for our next trip. After re-inserting the number panel and fixing the screw I caulked the joint between the panel and the door. All better now. Little things like this are so easy to overlook but attention to detail can save a lot of heartache and money in the long term. I also cleaned the roof and touched up the Dicor in a few areas and she should be good to go for the year.
Steve
__________________
Steve, Berne and Rascal
2012 Jayco 31.5 RLTS
2007 F250 Powerstroke
|