Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 07-22-2016, 03:55 PM   #11
Senior Member
 
Join Date: Jan 2016
Location: Cleveland
Posts: 279
Quote:
Originally Posted by borninblue View Post
Can I just pop the panel off the awning light by using a flat head screw driver underneath it? The only screws I see are on the awning and slide switches.

Sent from my SM-N910P using Tapatalk
Click image for larger version

Name:	uploadfromtaptalk1469220142079.jpg
Views:	23
Size:	34.7 KB
ID:	25749

Sent from my SM-N910P using Tapatalk
__________________

borninblue is offline   Reply With Quote
Old 07-22-2016, 03:58 PM   #12
BCK
Senior Member
 
Join Date: Apr 2016
Location: Nanaimo
Posts: 256
the screws are in the side of the plastic into the wood. I can see one in the photo to the right of the slide switch. There should be about 4 of them and the 2 screws for the door catch on the left side.
__________________

__________________
2016 Jayflight 26BHS Elite
2014 F150 4x4 Super Crew, Eco-Boost, Max Tow
Bayliner Trophy 2002ff
BCK is offline   Reply With Quote
Old 07-22-2016, 07:16 PM   #13
Senior Member
 
Join Date: Jul 2012
Location: New Haven, NY
Posts: 551
The covers around the light switches just pop off and you can remove the switches and their mount by removing a couple screws. The entire panel comes off with screws into the side. You also need to remove the screws in the door catch.
__________________


2017 28BHBE Kitchen skylight, remote control and Aluminum wheels hitched by ProPride 3P
2012 Jayco Jay Flight 26BH traded in
2013 Toyota Tundra DC 4x4, 5.7, 6 speed 4.30 gears
LiftedAWDAstro is offline   Reply With Quote
Old 07-23-2016, 12:04 AM   #14
Senior Member
 
Join Date: Jan 2016
Location: Cleveland
Posts: 279
Quote:
Originally Posted by LiftedAWDAstro View Post
The covers around the light switches just pop off and you can remove the switches and their mount by removing a couple screws. The entire panel comes off with screws into the side. You also need to remove the screws in the door catch.
Thanks guys, I was able to remove each individual plate for the awning light and recessed lighting. All connections appeared connected properly and were not loose. Not sure what can now be the problem, guess I will have to drive in to the shop.

Sent from my SM-N910P using Tapatalk
borninblue is offline   Reply With Quote
Old 07-25-2016, 11:07 AM   #15
Member
 
Sunflake's Avatar
 
Join Date: Jun 2016
Location: Tooele
Posts: 77
I have a 2016 27BHS. If you can unplug the wires from the awning light and then Turn the switch on. If the fuse blows then You have a wire issue in the trailer, if it doesn't blow you have proven it's the light.
__________________
Patrick
HVAC Tech

2007 Dodge Ram 2500 6.7L Cummins
2016 Jayco Jay Flight Elite 27BHS
Sunflake is offline   Reply With Quote
Old 07-25-2016, 11:11 AM   #16
Senior Member
 
Join Date: Jan 2016
Location: Cleveland
Posts: 279
Thanks for the tip, going to try that now. Just brought her home from storage.

Sent from my SM-N910P using Tapatalk
borninblue is offline   Reply With Quote
Old 07-25-2016, 11:58 AM   #17
Member
 
Sunflake's Avatar
 
Join Date: Jun 2016
Location: Tooele
Posts: 77
Let me know if I can help with anything.
__________________
Patrick
HVAC Tech

2007 Dodge Ram 2500 6.7L Cummins
2016 Jayco Jay Flight Elite 27BHS
Sunflake is offline   Reply With Quote
Old 07-25-2016, 12:28 PM   #18
Senior Member
 
Join Date: Jan 2016
Location: Cleveland
Posts: 279
Quote:
Originally Posted by Sunflake View Post
Let me know if I can help with anything.
Click image for larger version

Name:	uploadfromtaptalk1469466895388.jpg
Views:	15
Size:	51.3 KB
ID:	25795Click image for larger version

Name:	uploadfromtaptalk1469466902023.jpg
Views:	12
Size:	52.5 KB
ID:	25796

Sent from my SM-N910P using Tapatalk
borninblue is offline   Reply With Quote
Old 07-25-2016, 12:32 PM   #19
Senior Member
 
Join Date: Jan 2016
Location: Cleveland
Posts: 279
Definitely a rats nest. So from what I can tell all connections are intact. The farthest switch on the bottom right is the awning light which pops the fuse. The one run in line with it is the litchen recessed lighting which also does not work, but does not blow the fuse. So I am assuming there is a short somewhere when the awning is powered on. I got up on the roof and looked at all the connections tonthe light and the appear normal. There is a box inside the cabinet behind the panel where I am assuming there are more connections. However it is stapled, and I don't want the claim that I caused the issue if I open it. Any other suggestions?

I also forgot to add that when my cellphone is pluggedin the charging port in the bedroom the radio in the trailer goes to complete static? Ground issue maybe?

Sent from my SM-N910P using Tapatalk
borninblue is offline   Reply With Quote
Old 07-25-2016, 01:45 PM   #20
Member
 
Sunflake's Avatar
 
Join Date: Jun 2016
Location: Tooele
Posts: 77
Could be. When you unplugged the awning light what happened?
__________________

__________________
Patrick
HVAC Tech

2007 Dodge Ram 2500 6.7L Cummins
2016 Jayco Jay Flight Elite 27BHS
Sunflake is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 04:34 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.