|
|
02-02-2012, 11:57 AM
|
#1
|
Senior Member
Join Date: Nov 2010
Location: SE, MI
Posts: 3,517
|
Jayco Schematics and Drawings
Don't know if everyone knows but Jayco will send you the drawings and schematics for your unit if you provide them the VIN and all of your contact information. These come as pdf files and have been free in all of my contacts.
You need to Fill out this Form at the Jayco site.
This will only work for a unit that is 'out of warranty'.
The VIN is very important since instructions that followed my 6 files were:
"Print 21.737 use page 19 of 39 Doorside Print 21.742 use page 8 of 21 Off-door side Print 22.012 page 4 of 9 rear wall Prints 22.335 use page 11 of 20 and print 22.025 use page 3 of 5"
You can see that out of 94 drawings I will use 5 of them for my unit. The sixth file included all of my 12V, 120V, Black, Grey, and FW systems.
I did not request the roof framing but may do that in the future. Be specific on what you want as they only give you what you ask for.
My request was filled in 18 hours so the service department was very responsive.
Great service from a customer focused company.
__________________
2008 Jayco 322FKS, Hemi, Hensley, Oreo the Malshi, DW and I
Tracking campgrounds with Ultimate Campground Log
|
|
|
02-02-2012, 01:56 PM
|
#2
|
Junior Member
Join Date: Jul 2011
Posts: 11
|
Very helpful, thank you.
Requesting my Electrical diagrams today.
__________________
NetStalker, aka Allen
2011 Ford F-150 SuperCrew 5.0, 3.55r, All Stock "Big Blue"
2007 Jayco Jayflight 25RKS "The Mobile Shower with Hair Dryer Attachment"
Equalizer Hitch
2 Dogs "Rocko and Scooby"
|
|
|
02-03-2012, 09:17 AM
|
#3
|
Member
Join Date: Nov 2011
Location: Phoenix, AZ
Posts: 74
|
Be sure to be specific as to the type of drawings you want. My first go was to ask for the drawings. She wanted me to be more specific as there's 200-300 drawings per trailer.
This is for a 2012 bought this past December so they don't have to be out of warranty.
__________________
2012 Swift SLX 145RB
2013 Ford F150 XLT Ecoboost Supercrew Short Bed w/ Eaz-Lift Elite WDH
|
|
|
02-03-2012, 02:56 PM
|
#4
|
Senior Member
Join Date: Dec 2009
Location: Maplesville - Home Base
Posts: 3,059
|
My Designer was still in warranty, and still is now, when I asked for the audio/visual wiring prints. They were emailed in a matter of minutes. I requested over the phone.
__________________
Ed
KM4STL
2006 GMC 2500HD CCSB 4x4 Duramax/Allison, Titan 52 gallon fuel tank, Prodigy Controller, B&W Companion Hitch
2010 Jayco Designer 35RLTS, Cummins/Onan RV QG 5500 EVAP, Progressive Industries EMS-PT50X, TST Systems 507 TPMS, RV Flex Armor Roof
|
|
|
02-03-2012, 03:37 PM
|
#5
|
Senior Member
Join Date: Nov 2010
Location: SE, MI
Posts: 3,517
|
In 2008 they would not send mine until the warrenty ran out. Glad they are sending them earlier now.
__________________
2008 Jayco 322FKS, Hemi, Hensley, Oreo the Malshi, DW and I
Tracking campgrounds with Ultimate Campground Log
|
|
|
02-03-2012, 03:37 PM
|
#6
|
Senior Member
Join Date: Apr 2011
Location: Southeast, NY
Posts: 1,113
|
I got the 120v and 12v drawings as for mine. Very nice to have!
__________________
Karl - Southeast, NY
2020 377 RLBH
2018 Ram 3500 Mega Limited 6.7L Cummins w/ Aisin
|
|
|
02-03-2012, 04:48 PM
|
#7
|
Senior Member
Join Date: Oct 2011
Location: Houston
Posts: 2,526
|
Jayco has been great with me. Each time I have asked them for something, they quickly respond. Last time, I requested wiring diagrams and I had them back within 20 mins.
__________________
Mike, Sue, Sissy and Little Man
2015 Ford F350 Lariat FX4 6.7 CC DRW
2015 Eagle Premier 351RSTS
|
|
|
02-03-2012, 09:31 PM
|
#8
|
Member
Join Date: Nov 2011
Location: Phoenix, AZ
Posts: 74
|
+1 I just got the electrical and plumbing diagrams as well the framing layout for back and both side walls.
__________________
2012 Swift SLX 145RB
2013 Ford F150 XLT Ecoboost Supercrew Short Bed w/ Eaz-Lift Elite WDH
|
|
|
07-03-2012, 04:33 PM
|
#9
|
Junior Member
Join Date: Jun 2012
Location: Lincoln, NE
Posts: 1
|
Hi, I just talked to Jayco about getting audio video schematics for my 2012 Pinnacle. They told me that until it was off warranty that they couldn't help.
|
|
|
07-03-2012, 06:53 PM
|
#10
|
Senior Member
Join Date: Sep 2011
Location: Luray, VA (central Shenandoah Valley of VA)
Posts: 1,430
|
Jayco has been super with addressing all my requests and questions. Couldn't ask for better service. Thanks so much, Randy Borkholder !!
__________________
2003 Ford F-350 V-10 Crew Cab 4WD Long Bed
2004 Jayco Designer Medallion 29 RLTS 5th wheel
Bill, Gayle, Teddy (Jack Russell terrier), and Honey (Beagle)
Retired at last !
Nothing is foolproof to a sufficiently talented fool.
|
|
|
07-03-2012, 07:04 PM
|
#11
|
Member
Join Date: Jun 2012
Location: Virginia
Posts: 66
|
Thanks for that. This past weekend I was tiring to trace wires. No more. Guessing
__________________
2010 Siverado LTZ Crew Cab
2010 Jayco 23J
E2 w/ Prodigy
|
|
|
05-25-2013, 04:00 PM
|
#12
|
Junior Member
Join Date: May 2013
Location: Peoria, Arizona
Posts: 26
|
Share drawings
Hey gang, I'm very new to this site and also to travel trailer camping. We've been tent camping for years and have finally made the leap. I have been voracious in reading everything I can about boondocking and extending the life of my batteries but want to put in solar charging and an inverter with an automatic transfer switch. I need a set of drawings for the 2011 Jayco 198RD, but fear it is still in warranty. We are the second owner. Does anyone have a set of drawings they would be willing to share with a newbie?
Regards,
John and Jodie
|
|
|
05-25-2013, 06:07 PM
|
#13
|
Site Team
Join Date: Feb 2011
Location: DeWitt, MI
Posts: 1,213
|
Quote:
Originally Posted by jhartline
Hey gang, I'm very new to this site and also to travel trailer camping. We've been tent camping for years and have finally made the leap. I have been voracious in reading everything I can about boondocking and extending the life of my batteries but want to put in solar charging and an inverter with an automatic transfer switch. I need a set of drawings for the 2011 Jayco 198RD, but fear it is still in warranty. We are the second owner. Does anyone have a set of drawings they would be willing to share with a newbie?
Regards,
John and Jodie
|
Did you try the link in the OP?
__________________
MODERATOR
2007 Jayco Feather 19H
2008 Ford Explorer SportTrac
|
|
|
06-26-2014, 07:52 AM
|
#14
|
Junior Member
Join Date: Jun 2014
Location: la mesa
Posts: 4
|
I hope this is the right place. i need the wiring diagram for the "big foot" leveling system on my 2005 granite ridge/greyhawk. I need to see how the 120 amp breaker is wired into the system, and does it use a inverter.
thanks
journ 1.
p.s I tried the webb site at the top but it does not work any more.
|
|
|
06-26-2014, 10:20 AM
|
#15
|
Moderator Emeritus
Join Date: Apr 2011
Location: Michigan
Posts: 9,424
|
Welcome to JOF
I would contact Jayco directly, they are usually pretty good about sending out the electrical schematics on their RV products. Just have your VIN number handy when you contact them.
Jayco 574-825-5861
Bob
__________________
2016 GM 2500HD 6.0L/4.10
2018 Jay Flight 24RBS
2002 GM 2500HD 6.0L/4:10 (retired)
2005 Jayco Eagle 278FBS (retired)
1999 Jayco Eagle 246FB (retired)
Reese HP Dual Cam (Strait-Line)
|
|
|
06-26-2014, 10:20 AM
|
#16
|
Senior Member
Join Date: Sep 2013
Location: East Grand Forks, MN
Posts: 317
|
could I get a bit more info? If you PM me your VIN, can see what I can do.
|
|
|
06-26-2014, 01:26 PM
|
#17
|
Senior Member
Join Date: Jan 2011
Location: Vienna
Posts: 2,044
|
schematics
Quote:
Originally Posted by Dannyh
Hi, I just talked to Jayco about getting audio video schematics for my 2012 Pinnacle. They told me that until it was off warranty that they couldn't help.
|
X2. Absolutely refused to give me any schematics/plans/etch as long as my unit is in warranty. Since it is a 2014, I have a long wait. I think it depends on whom you talk to or who gets your email!
__________________
Joe Hinson
2010 Jayco Quest G2(SOLD)
2014 Jayco Eagle 33.5RETS
2007 Ram 2500 5.9L Cummins(SOLD)
2015 Ram 2500 6.7L Cummins 4WD
:)
|
|
|
06-26-2014, 02:36 PM
|
#18
|
Junior Member
Join Date: Jun 2014
Location: la mesa
Posts: 4
|
thanks.i'm on the phone now.
journ 1
|
|
|
06-26-2014, 07:30 PM
|
#19
|
Junior Member
Join Date: Nov 2013
Location: Craig
Posts: 24
|
I tryed to get the wiring schematic for mine 2014 White Hawk. I emailed Jayco and got a pone call. The person said that due to liability that Jayco will not provide the schematic.
|
|
|
06-28-2014, 05:09 PM
|
#20
|
Junior Member
Join Date: Jun 2014
Location: la mesa
Posts: 4
|
Thanks for all the help and suggestions. "FYI" Jayco does not have elecltric diagrams on my " Care Free" awning.It seems that if the system was not installed at Jayco, then they did not receive any diagrams to those systems.
Thanks.
journ 1
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|