MaxxFan in bathroom (1 speed or off)

[jasonmiddlebrooks]

So i have a 2017 northpoint and the exhaust fan in the bathroom was working fine. Now it only has one speed. You turn it on and it starts to spin. When you try to adjust the speed it sounds like it tries to change but it simply cuts off. Hit the speed/on button and it comes back on. I would not think it is the wiring. I am thinking it must be the motor. But was wonder if anybody else has had this problem before i take it out and figure out what to do.

Thanks


Sent from my iPhone using Tapatalk

[Marcm157]

Sounds like a bad switch...

[jasonmiddlebrooks]

That would be the switch on the fan itself... switch on the wall is either on or off..


Sent from my iPhone using Tapatalk

[jasonmiddlebrooks]

Well i finally decided to see what i could do about this fan issue. Called airxcel and talked to their tech support and they said it sounded like the printed circuit board. I gave them the serial number, they sent out a new PCB, and now i have a working four speed fan in the bathroom again. I must say i had a great experience dealing with airxcel/maxxfan directly. No need to mess with the dealer or Jayco with this issue.


Sent from my iPhone using Tapatalk

[Marcm157]

Glad to hear it worked out well for you...

[Shorty Cox]

I have one in my unit, but I don't recall a time I have used it. Of course, understand, My stuff don't stink!!!!!