Jayco RV Owners Forum

Thread Tools Display Modes
Old 04-01-2016, 08:25 AM   #11
Junior Member
Join Date: May 2015
Location: Aurora
Posts: 20
Here is a thread where I posted photos of mine and some others did as well. I found my wires behind a piece of trim in a upper cabinet right where they exited the camper to go to the power awning and the led light strip, that came factory installed. I put mine inline so the switch for the existing light stop still provides power but the little dimmer can do its job only when the switch is on. Best part I can actually turn off the awning light and leave just the amber step light, since on my camper they are wired together. I found the dimmer on Amazon or e-bay for a few dollars, just depends on how fast you want of need them. I read reviews that people had problems with them so I ordered two but the first one worked great and I am pleased with the results. It even remembers the last setting, so if I turn it off with the switch when I turn it back on it returns to the same dimming level as before. The remote is ok not a ton of range but does the job and gives you preset % or you can adjust up and down.


2007 Toyota Sequoia
2014 Jayco 23F
mlugi is offline   Reply With Quote
Old 04-01-2016, 08:34 AM   #12
Senior Member
Chrislorl's Avatar
Join Date: Jun 2015
Location: Central Florida
Posts: 190
Hey guys, sorry I was away. That is the same one I used, paid a bit more for it but same one. I had to mount the dimmer out at the LED strip, but the remote works great.

2015 31RLDS
2001 F250 Superduty
2 Crazy Huskies
Chrislorl is offline   Reply With Quote
Old 04-01-2016, 09:04 AM   #13
Senior Member
oldmanAZ's Avatar
Join Date: Dec 2014
Location: AZ
Posts: 3,744
Thanks, both! Back when the mod linked above was posted, DW and I were on the road... blinding ourselves and everyone near us with the awning lights.
Sherm & Terry w/rescues Steve (std Poodle) & Eydie (min Schnauzer)
2015 Jay Flight 27RLS (Camped: 102 nights 2015, 90 nights 2016)
2006 Ford F350 6.0 PSD, Lariat, 4WD, CC, LB, SRW, auto., Camper pkg.
oldmanAZ is online now   Reply With Quote
Old 05-09-2016, 02:15 PM   #14
Junior Member
Join Date: Mar 2016
Location: East Haven
Posts: 4
how is this installed outside at the end of the led light strip?? Any photos or instructions on how to do this?? Thanks!
coondoga1 is offline   Reply With Quote
Old 05-10-2016, 05:53 AM   #15
oldenuftoknowbetter's Avatar
Join Date: Mar 2016
Location: Triad
Posts: 83
Originally Posted by coondoga1 View Post
how is this installed outside at the end of the led light strip?? Any photos or instructions on how to do this?? Thanks!
There should be about 5 inches of exposed wire on the right end of the strip light that turns down and runs into the support for the awning. I installed mine there and wire tied it to the awning support.

Make sure you install the transmitter in the correct orientation. Also, you will need to seal the transmitter where the wires run under the heat shrink (you'll see what I mean when you receive the unit).

Very simple installation. I used crimp wire connectors and shrink wrap.

I mounted the remote just inside the door using a small piece of velcro tape (with all of the other controls/monitors).

2016 Starcraft Launch Ultralite 26 BHS W/ProSeries WDH
2013 Ford F-150 Supercrew 5.0L W/factory tow package
oldenuftoknowbetter is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 10:14 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.