![Reply](/forums/images/jayco/buttons/reply.gif) |
|
03-04-2015, 03:28 PM
|
#21
|
Senior Member
Join Date: Oct 2014
Location: Lower Alabama (LA)
Posts: 2,010
|
Today was the day to do this and I couldn't find the hose adaptor so ... I hand held the hose for nearly 15 min. pumping water in. Finally full I held my breath and turned on the pump ... everything there still worked like it should. Now it's sitting/sanitizing. Tomorrow I'll procure another adaptor, drain, refill, flush, and drain completely once again.
Oh yeah, if one cup of Clorox is good then two would be better. So that's what I did.
Then I'll add maybe a quarter tank of water (for highway toilet flushing).
__________________
former 2008 Jayco Eagle 29.5 RLS
former 2014 F250 6.7 4X4, CC LB
|
|
|
05-18-2015, 05:19 AM
|
#22
|
Junior Member
Join Date: Apr 2015
Location: Oskaloosa
Posts: 10
|
Any great ideas for getting the bleach solution into the fresh water tank? My Jayco does not have a gravity fill for the fresh water tank, only a city water hose connection with a valve switch to get water to the tank.
|
|
|
05-18-2015, 06:37 AM
|
#23
|
Senior Member
Join Date: Nov 2011
Location: Clinton, NC
Posts: 325
|
Quote:
Originally Posted by Greenjeans
Any great ideas for getting the bleach solution into the fresh water tank? My Jayco does not have a gravity fill for the fresh water tank, only a city water hose connection with a valve switch to get water to the tank.
|
Do you have a country fill option on your manifold? We use the country fill to introduce bleach solution into the system.
__________________
Kettrell & Sharon
Greyhawk 31DS
|
|
|
05-18-2015, 06:59 AM
|
#24
|
Senior Member
Join Date: Mar 2013
Location: Kansas City
Posts: 1,712
|
Quote:
Originally Posted by Greenjeans
Any great ideas for getting the bleach solution into the fresh water tank? My Jayco does not have a gravity fill for the fresh water tank, only a city water hose connection with a valve switch to get water to the tank.
|
On a YouTube video I saw, they just dumped bleach into the fill hose before connecting it to the TT then turned on the water to push the bleach into the tank.
__________________
2018 28BHBE
2017 Ford F250 XLT, 6.2 gasser
2013 26BH (traded)
|
|
|
05-18-2015, 07:33 AM
|
#25
|
Senior Member
Join Date: Jan 2014
Location: Los Lunas, New Mexico
Posts: 3,766
|
Somewhere on this Forum, I read that if you cut off the end of a hose to fill FW tank. I now use a ~12" hose end in my FW fill and just leave it in there....pull it out some, hook up the water hose to it, and fill the tank. No holding, splashing or getting wet. Works great for me.
Happy RVing,
Jeff
__________________
2018 Eagle HT 26.5 RLDS. SOLD
2009 F150 Supercab UNICORN, 5.4L ,3.73, HD and Max Tow Packages, Timbrens, Bilstein shocks.
Wet bolt kit. Andersen Ultimate 20K hitch. TST 507RV TPMS. Hydro Life HL-200. 16" Goodyear Endurance. Progressive EMS. SteadyFast Stabilizers. Furion backup camera.
Best friend wife, Di, and dog Cooper. RETIRED
|
|
|
05-18-2015, 07:54 AM
|
#26
|
Junior Member
Join Date: Apr 2015
Location: Oskaloosa
Posts: 10
|
No country fill
|
|
|
05-18-2015, 08:01 AM
|
#27
|
Junior Member
Join Date: Apr 2015
Location: Oskaloosa
Posts: 10
|
That's what I did but the trailer is up hill from the water source therefore it's nearly a 2 person job, a hand to hold each hose and one to pour the bleach. Seems like there should be a better way other than this redneck solution?
|
|
|
05-18-2015, 09:07 AM
|
#28
|
Senior Member
Join Date: Nov 2013
Location: north az
Posts: 305
|
I just run "city water" thru system. Its got tons of chemicals in it, that's why a lot of folks buy bottle water to drink and use "city water" to clean. Could see a problem if you use untreated water.
|
|
|
05-18-2015, 09:27 AM
|
#29
|
Senior Member
Join Date: Apr 2012
Location: White Bear Lake
Posts: 409
|
Quote:
Originally Posted by arkhillbilly
I just run "city water" thru system. Its got tons of chemicals in it, that's why a lot of folks buy bottle water to drink and use "city water" to clean. Could see a problem if you use untreated water.
|
Apparently you haven't heard - almost all bottled water is just "city water". Very few companies even do as little as extra filtering, let alone scrubbing out the "chemicals". And city water only barely has enough "chemicals" (chlorine) to keep it things from growing in it on it's way to your tap. Let it sit for even a day, and the little bit of chlorine leaves by gassing off ("evaporation", kind of). It is no way strong enough to do any good in sanitizing a system.
As far as heaters - due to their warm environments, and smaller tubes in the heater core, they are prime areas for things to grow. Using the recommended amount of bleach and letting it sit will prevent that. Using lots of extra bleach on the theory that more is better, can corrode the heater. So keep to the recommended amounts, and you'll never have an issue. But you should always include the heater in the sanitization routine.
__________________
2012 Ford F-150 Eco, SCrew, 4x4, MaxTow, HD Payload
SOB, used to be:Jayco 26.5 RLS
|
|
|
![Reply](/forums/images/jayco/buttons/reply.gif) |
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|