wall thickness

[dhinkle57]

I'm installing a television mount in our 2014 x23b. The plans from Jayco say there is 1" thick plywood plate where the mount is going, but I have no wall thickness number. I don't want to go through the wall. Any body know the wall thickness?

[krackeer]

I don't have the same rv that you do, but I was informed that I had the same size plate as you. I used 1 1/4 inch screws for mine. I figured some thickness for the wall mount as well as the wall board. Holds up my 19 inch led just fine.

[dhinkle57]

I came up with 1" and 1 1/2" lag screws. I don't know if the 1" will hold and I'm afraid the 1 1/2" are too long.
I guess I'll try to find 1 1/4".
Thanks for the info.