|
02-27-2016, 07:46 PM
|
#1
|
Junior Member
Join Date: Feb 2016
Location: Glendale
Posts: 6
|
New to the Forum - Already have questions
New to the forum, but have been reading over it for the past month, getting some good ideas and pointers and have run into my own dilemma and thought this was the best way to get it figured out..
I ]recently purchased a 2008 Eagle Super Lite 28.5, my 2 vents don't have fans and i wanted to install the Vortex II fans in them but cannot find the power source to connect them to.. any suggestions and/or advice would be greatly appreciated.
|
|
|
02-27-2016, 08:41 PM
|
#2
|
Senior Member
Join Date: Dec 2014
Location: FL
Posts: 11,281
|
Welcome to the forum.
Not sure if it is any help... For my Vortex II they are getting power from the ceiling lights that run down the center of the trailer.
__________________
Sherm & Terry w/rescue Eydie (min Schnauzer) & Charley (std Poodle)
SOLD:2015 Jay Flight 27RLS, GY Endurance (E), Days: 102 '15, 90 '16, 80 '17, 161 '18, 365+ '20
SOLD: 2006 Ford F350 PSD, 4WD, CC, LB, SRW, Camper pkg., 375,000mi
Full timing: Some will think you're crazy, some will be envious, just enjoy the freedom!
|
|
|
02-27-2016, 09:00 PM
|
#3
|
Junior Member
Join Date: Feb 2016
Location: Glendale
Posts: 6
|
Thanks! That's what I was thinking, but wasn't sure if I had to be careful for AC/DC wires (so I was told).
Also, I couldn't find the wires down in the living area, are they easily accessible? I found the ones above the bed, but just wasn't sure if I could/should just splice the power and ground wires since I'll have to have the light swith on..
|
|
|
02-27-2016, 09:09 PM
|
#4
|
Senior Member
Join Date: Nov 2014
Location: Trussville, Al
Posts: 2,093
|
Welcome aboard
__________________
Ron, Barbara & rescues Beamer (Lab mix), Buddy (Cavalier spaniel), Ruger (Golden retriever), Stanley (Bassett/Springer mix) and 3 grandsons
2012 Jayco Feather 29L BH
2015 Chevy 2500 HD Duramax and Equalizer WDH
|
|
|
02-27-2016, 09:55 PM
|
#5
|
Senior Member
Join Date: Jan 2014
Location: Los Lunas, New Mexico
Posts: 3,766
|
Welcome to the forum.
Is that slammed 79 chev a corvette or.....? Sold my slammed 79 Vette in 2013.
Happy RVing,
Jeff
__________________
2018 Eagle HT 26.5 RLDS. SOLD
2009 F150 Supercab UNICORN, 5.4L ,3.73, HD and Max Tow Packages, Timbrens, Bilstein shocks.
Wet bolt kit. Andersen Ultimate 20K hitch. TST 507RV TPMS. Hydro Life HL-200. 16" Goodyear Endurance. Progressive EMS. SteadyFast Stabilizers. Furion backup camera.
Best friend wife, Di, and dog Cooper. RETIRED
|
|
|
02-27-2016, 10:00 PM
|
#6
|
Junior Member
Join Date: Feb 2016
Location: Glendale
Posts: 6
|
No, it's a c10.. my drag truck.
My tow pig is a 2016 F350 with the 6.7 diesel.
|
|
|
02-28-2016, 05:12 AM
|
#7
|
Senior Member
Join Date: Nov 2013
Location: Duxbury
Posts: 7,113
|
Welcome!
__________________
Rob & Kelly, Bella & Brady (Miniature Schnauzers)
2022 Eagle HT 28.5RSTS
2017 RAM 3500 SRW CTD/AISIN CC LB
|
|
|
02-28-2016, 09:14 AM
|
#8
|
Site Team
Join Date: Nov 2012
Location: Clearwater, FL area
Posts: 5,196
|
CONGRATULATIONS on the JAYCO!!!
...and WELCOME TO JOF!!! The members here are GREAT!!! There is a lot of GREAT information to be found here. I am sure that you will have information and pictures to share with us... so please do!!
Don
|
|
|
02-28-2016, 10:53 AM
|
#9
|
Junior Member
Join Date: Feb 2016
Location: Glendale
Posts: 6
|
How do I add pictures?
|
|
|
02-28-2016, 03:31 PM
|
#10
|
Senior Member
Join Date: Dec 2012
Location: NW AR (God's Country)
Posts: 2,051
|
Quote:
Originally Posted by slammed79chev
Thanks! That's what I was thinking, but wasn't sure if I had to be careful for AC/DC wires (so I was told).
Also, I couldn't find the wires down in the living area, are they easily accessible? I found the ones above the bed, but just wasn't sure if I could/should just splice the power and ground wires since I'll have to have the light swith on..
|
If you remove the shroud from around the vents there "should be" wires in the ceiling nearby. You could use a voltage tester (found at HD or Lowes) to check for any hot wires. Chances are you are going to lose your light source anyhow, if you cut the wires going to the new fan location during installation of the new fan. You might as well use a flashlight or some other light source while working on this project and disconnect any incoming power just to be on the safe side.
__________________
Skip
2012 Eagle Super Lite HT 26.5RKS
2005 GMC 2500 SLT HD D/A
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|