 |
12-26-2010, 10:47 AM
|
#1
|
|
Senior Member
Join Date: Jul 2009
Location: Mostly the US
Posts: 10,002
|
Newb here but an auto forum vet
Hi JoeBob and welcome to the Jayco Owners Forum 
__________________
Denise, DH, grandkids, and two rescue pups
-2016 Jay Flight 29QBS Elite
-2016 Ford F-250 XLT 4x2, 6.2L EFI V8, 4.30 Elec Lock, Heavy duty Alt
|
|
|
|
12-26-2010, 12:28 PM
|
#2
|
|
Member
Join Date: Dec 2010
Location: Reno NV
Posts: 33
|
Newb here but an auto forum vet
Picked up a 1990 Thrush 6 (pop up tent trailer) from my brother. He is a maintenance deferred kinda guy. I'm cleaning up the problems.
Converter doesn't want to charge the battery when on 110 outside power. I've thrown the switch to allow 110 to be converted and the battery is hooked up correctly. It will illuminate the lights with 12v and 110. All fuses are good (5 & 15 amp). Any suggestions?
I DO have an external charger that I can plug in but that is a PITA.
I also have power at one of the pins in the wire harness, but it doesn't charge off the tow vehicle.
The tow is a GMC Yukon, could the wire harness be incorrectly wired? Are there any schematics archived someplace?
There are issues with the fridge and the heater.....still exploring and will post later.
__________________
03 Yukon Quadsteer, 2500/6.0L
90 Thrush 6 Jayco, Baja wannabe
73 911 Carrera RS, cab 3.6
|
|
|
|
|
12-26-2010, 01:09 PM
|
#3
|
|
Senior Member
Join Date: Dec 2010
Posts: 427
|
Welcome to the site...
Well as for the battery charger find the 120 VAC cord and check and be sure there is 120 VAC getting to the charger. Then disconnect the output and check the charger to see if there is 13-14 VDC coming out. If nothing coming out of the charger check for a blown fuses on the charger.
For the refrigerator and heater I'm gather your having a tough time lighting the burners on both? Might be air in the line some light the stove burner and allow it to burn while trying to light the heater and fridge to aid in get the air out of the lines...
|
|
|
|
|
12-26-2010, 05:00 PM
|
#4
|
|
Member
Join Date: Dec 2010
Location: Reno NV
Posts: 33
|
The output while on 110, is 13+ Volt. It's just not getting to the battery.
I figure splicing in a suitable gauged + and - wire into the lighting circuit, with a fuse, to the battery would accomplish the desired effect.
Both fuses in the panel, as I mentioned in my OP are good.
__________________
03 Yukon Quadsteer, 2500/6.0L
90 Thrush 6 Jayco, Baja wannabe
73 911 Carrera RS, cab 3.6
|
|
|
|
|
12-27-2010, 10:10 AM
|
#5
|
|
Senior Member
Join Date: Jun 2010
Location: Saskatoon Sask Canada
Posts: 10,726
|
Quote:
Originally Posted by Joe Bob
The output while on 110, is 13+ Volt. It's just not getting to the battery.
I figure splicing in a suitable gauged + and - wire into the lighting circuit, with a fuse, to the battery would accomplish the desired effect.
Both fuses in the panel, as I mentioned in my OP are good.
|
There is usually a breaker near the battery check that too...
__________________
Seann
2004 Chev Silverado Duramax optioned past the max. 2009 Jayco Eagle 308 RLS 900watts of solar, Lithium batteries (400amp hour), 2000 watt (4000 surge) whole house inverter.
145days /2023 2022/151 2021[/COLOR]
93/2020,157/2019219/2018 206/2017,215/2016, 211/2015, 196/14, 247/13, 193/12
|
|
|
|
|
12-27-2010, 11:08 AM
|
#6
|
|
Moderator Emeritus
Join Date: Jun 2009
Location: Canyon Lake
Posts: 150,875
|
Welcome to JaycoOwners Joe Bob!!
__________________
Rolly AKA "KxCowboy"
'75 Dodge Class A Motorhome AKA "The Getto" :eek:
|
|
|
|
|
12-27-2010, 12:52 PM
|
#7
|
|
Site Team
Join Date: Nov 2010
Location: Virginia`s Eastern Shore
Posts: 17,093
|
Welcome to the group, Joe Bob.
__________________
2017 Coachmen Catalina 283RKS
2018 Ford F250 Super Duty 6.2l CCSB
2010 Jayflight 28BHS (sold)
|
|
|
|
|
12-28-2010, 09:26 AM
|
#8
|
|
Senior Member
Join Date: Dec 2009
Posts: 213
|
RV Plug schematic
You asked for a schematic for the RV plug. I am trying to attach a schematic to this reply. I hope it works. Otherwise:
Terminal 1 = Ground (white)
Terminal 2 = Electric Brakes (blue)
Terminal 3 = Tail Lights (brown)
Terminal 4 = 12V (black)
Terminal 5 = Left Turn Signal (yellow)
Terminal 6 = Right Turn Signal (green)
Center terminal = Auxiliary (orange)
|
|
|
|
|
12-31-2010, 09:13 PM
|
#9
|
|
Member
Join Date: Dec 2010
Location: Reno NV
Posts: 33
|
It looks like that the trailer wiring was incorrect. The square 6 off of the trailer went to a small round 6.....the wires inside were wrong, redid them and then hooked it to the GMC "7" pin adapter.
Sorry, the bottom should read running lights. Got chopped off. The adapter makes no provision for the back up lights and is unused.
__________________
03 Yukon Quadsteer, 2500/6.0L
90 Thrush 6 Jayco, Baja wannabe
73 911 Carrera RS, cab 3.6
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
