Jayco RV Owners Forum

Thread Tools Display Modes
Old 03-11-2015, 05:50 AM   #1
Junior Member
Join Date: Mar 2015
Location: Billings
Posts: 9
E-Track install

I am bringing home a Seismic Wave today and I have been looking into various ways to tie down the toys. Has anyone installed e-track? With all the hardware options it looks very versatile. My question is how to install the track. Anyone have any ideas or caveats? Main toys will be a SxS and/or a Harley. TIA

MTRKC is offline   Reply With Quote
Old 03-11-2015, 07:21 AM   #2
Senior Member
Clayton4971's Avatar
Join Date: Oct 2013
Location: Michigan
Posts: 353
E-Track install

I frequent the polaris RZR forum a lot and the subject comes up a lot I am sure what info you don't get here you can go there and pick up more. A lot of the SxS groups uses the e track and really like it . My experience in tying sxs and quads down is to use tire bonnets , don't use the suspension . I usually travel from Michigan to AZ every year and double tow. In the beginning I could rip and break a 2" strap in less than half way there. Amazing the movement in the back on some of the rough roads. The e- trac with bonnets would be great. As far as tying the e-trac down maybe someone that has done it can step in and help.

Clayton4971 is offline   Reply With Quote
Old 03-15-2015, 07:34 AM   #3
Senior Member
Join Date: Dec 2012
Location: SE Minnesota
Posts: 165
E-track is available from red neck trailers, I do recommend using air liner track, yes it is more $$$ but it takes up alot less room
49 Nights camped in 2014
58 Nights camped in 2013
2013 Jayco JayFlight 28 BHBE born on Date 1/22/13
1985 21' Hi-Lo (Sold)
93 Yamaha G9A

Dirtfan is offline   Reply With Quote
Old 03-15-2015, 09:42 PM   #4
Junior Member
Join Date: Mar 2015
Location: Billings
Posts: 9
Thanks for the replies. The air liner track does look nice. I'm interested in some specific products designed for the e-track. I'll have to see if there are similar designs for the air liner track. A strip of that around the wall would be nice. Useful chair railing.
MTRKC is offline   Reply With Quote
Old 03-16-2015, 03:07 PM   #5
Senior Member
cariboocreek's Avatar
Join Date: Aug 2014
Location: Just outside Calgary
Posts: 274
I installed etrack in my cargo trailer with 1" wood screws with a 3/8 head. Every hole on the track has a screw and I strap down both my Harley's on the track. Did the same on the walls and ran track the full length of the trailer 36" above the floor. Works great with the track clips and tie downs.
2013 Ram Longhorn 3500 Crew Cab 6.7 Turbo Diesel, Aisin Transmission.
2014 Jayco Eagle Premier 351 RSTS, Mor/Ryde Suspension and Pin Box, 17.5" wheel upgrade, 18k Pull Rite hitch.
cariboocreek is offline   Reply With Quote
Old 03-17-2015, 09:20 PM   #6
Junior Member
Join Date: Mar 2015
Location: Billings
Posts: 9
Well, after many hours of looking and searching and calling, I have decided that the e-track just isn't a good fit for the way the garage floor is designed in the Seismic Wave. I still want to use the wheels to hold down the SxS so there is no additional strain on either the shocks or tie down rings. I like the 8 point tie down method used by the roll back guys. I can use the existing factory tie down rings for a slight variation of the method. Thanks for all the ideas you shared with me.
MTRKC is offline   Reply With Quote
Old 03-18-2015, 05:16 AM   #7
Join Date: Feb 2013
Location: Hot Sulphur Springs
Posts: 96
Let us know your final solution when done.


jaycojls is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 04:11 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.