I just made a small modification to use the HDMI on the TV. I have a couple different inputs that I use so need a simple way to plug them in. (2nd monitor for my laptop, Apple TV to connect iPhone to TV to see pictures on the large screen, HDMI wireless device to connect to Dish Receiver).
I drilled a 1" hole in the composite counter top (back left side) to run a power strip and a 6' HDMI cable.
Then removed the access panel under the table to position the power cord on the floor and fasten so it will not get in the way of the TV raising/lowering mechanism and plug in to the electric outlet on the floor.
Plug the HDMI cable in the side of the TV and fasten with sufficient slack to allow for the up and down positions and out of the way of getting caught in the movement
Now you will have a HDMI cable available to plug into what ever device you want and power available without using the front facing outlets.
Hope this may be helpful. Here is a picture ...
Originally Posted by McGarrett50
Thank you Marie. How's the Entegra? Great I'm sure!! Enjoy your summer!
My problem with the HDMI is getting behind the TV and plugging in and having to unplug to drop the TV as its configured in the 31UL over the dinette. Haven't figured that one out just yet.