My 314bds came with the propane connections run but no grill or mount. I looked around and found some pretty expensive mounts. Figured let me make my own. Took some 2x2 square stock and 1 3/4". Mounted 2x2 to the bumper and the other slides in and secures with two pins. When not in use I slide it in the other side spun 180 degrees for storage. Cost me $50 in steel, pins and welding wire. I drilled a bunch of 3/8 holes to lighten it up. If I could tig weld I would have made it out of aluminum. Any mods are appreciated. I thought about making a tilt bracket on the table part but if the trailer is level so is the BBQ and bracket. Tried to (KISS) keep it simple.
it's still not finished so any suggestions welcome
Linear Mode
