Originally Posted by GregJames
I can probably find a way to secure it for a couple days...
Do you have any pictures looking outside with the blinds up?
New guy here. I pulled my glass out on a different RV, but I assume it is the same. I pulled off the interior trim ring, measured the glass without breaking the seal on the out side. Then it can be ordered. When I was ready, I pulled the outside trim and glass out, popped out the glass, cleaned the sealant off. I was painting the trim at the time and tinting the glass. Then while that was out of the unit, I took a 55 gallon trash bag (drum liner), cut it up one side, slipped it over the door, and pulled the cut open side inside the RV (between door hinges and frame) and closed the door. That gave me several days with no issues.