Well it's been a week since I got the Seismic home and the mod forum had me thinking already. Seeing the jack panel was difficult so I started with my first mod there.
I cut a pice of 1/8" thick plywood 13.5 x 15.5 inches and covered with carpet that I had laying around. Found a piece of hinge and mounted it on the left side of the new board. Removed the electrical panel and directions and remounted them on my new board. Mounted the new board on the wall so it will swing around to the front so it can be seen now. I have to put some velcro on the backside to hold in place while traveling but it was to cold today.