|
10-03-2016, 07:50 PM
|
#1
|
Junior Member
Join Date: Sep 2016
Location: Glendora
Posts: 7
|
Honda eu2000i locking mount
Hey guys just wanted some feedback on this Honda eu2000i hitch mount I just finished. I used 1/4 inch steel and 3x3 angle. This uses 2 locks, one on top one on bottom. The back strap slides into another 1/4 inch piece of steel to lock it into place. Also made 3 mounting positions on the hitch mount. Thanks for the input. ( Sorry pictures are all sideways I don't know how to fix it)!
|
|
|
10-03-2016, 07:55 PM
|
#2
|
Senior Member
Join Date: Nov 2015
Posts: 1,036
|
I certainly wouldn't bother going after that one if I had any inclination.
|
|
|
10-03-2016, 07:58 PM
|
#3
|
Member
Join Date: Jul 2016
Location: san antonio
Posts: 36
|
looks good,,,always better secured,, too expensive
__________________
All appreciated...
Jayco Flight SLX 264bhw
2015 Chevrolet Silverado Crew Cab w. Tow pkg.
|
|
|
10-04-2016, 01:51 AM
|
#4
|
Senior Member
Join Date: Nov 2015
Location: Lakewood, WA.
Posts: 4,540
|
Sweet! So that is attach to the back hitch?
__________________
2023 Jayco North Point 310RLTS
2022 GMC Denali Ultimate DRW
Retired Army MSG
|
|
|
10-04-2016, 04:11 AM
|
#5
|
Senior Member
Join Date: Jun 2016
Location: Newburgh
Posts: 6,307
|
Very nice work and clean design. It clearly says you are serious about security.
__________________
2022 33RBTS
Progressive Industries EMS - Hardwired
Equalizer 4 Point WDH
2021 Ford F350 7.3
Air Lift Rear Bags w/ On Board Compressor (Pending)
2016 28BHBE - (Traded and Missed already)
|
|
|
10-04-2016, 05:38 AM
|
#6
|
Member
Join Date: Jul 2012
Posts: 99
|
Are you taking orders :-) Looks great, very clean set up..
|
|
|
10-04-2016, 07:19 AM
|
#7
|
Junior Member
Join Date: Sep 2016
Location: Glendora
Posts: 7
|
Yes I built it to hook into the receiver on the truck.
|
|
|
10-04-2016, 11:33 AM
|
#8
|
Senior Member
Join Date: Sep 2010
Location: PNW
Posts: 5,195
|
Looks great, but I would add a rubber cushion around the inside of the strap going around the Honda. Vibrations while running will probably cause a lot of wear/chafing on the plastic housing.
__________________
Bill
2011 Dodge Ram 1500 HEMI Quad Cab
2011 Jay Flight 26BH
|
|
|
10-04-2016, 11:36 AM
|
#9
|
Junior Member
Join Date: Sep 2016
Location: Glendora
Posts: 7
|
That's a good idea I will try and find some kind of soft rubber strap. Thanks smoker.
|
|
|
10-04-2016, 12:21 PM
|
#10
|
Senior Member
Join Date: Aug 2016
Location: Denver
Posts: 1,580
|
Awesome. I think all it's missing is a Ball on the top so you can lock it into your campers coupler and secure both at the same time. I bet you could sell that
__________________
2016 27BHS Elite
2012 F-150 EcoBoost / Max Tow (Sold)
2017 'Blue Jeans' 6.2 F-250 Lariat 4.3 gears.
|
|
|
10-04-2016, 01:43 PM
|
#11
|
Senior Member
Join Date: Apr 2016
Location: SW Washington
Posts: 1,024
|
Nice looking mount you made there .
__________________
2009 F350 CC LB 4WD
2017 Jayco 355MBQS
|
|
|
10-04-2016, 01:55 PM
|
#12
|
Junior Member
Join Date: Sep 2016
Location: Glendora
Posts: 7
|
Thanks!
|
|
|
10-04-2016, 06:23 PM
|
#13
|
Senior Member
Join Date: Nov 2015
Location: Lakewood, WA.
Posts: 4,540
|
Wow, this is one bad lock bracket, you probably can fit it to go to any generator and sell them.
__________________
2023 Jayco North Point 310RLTS
2022 GMC Denali Ultimate DRW
Retired Army MSG
|
|
|
10-04-2016, 09:10 PM
|
#14
|
Senior Member
Join Date: Apr 2015
Location: Boston Suburbs
Posts: 302
|
Wow. That came out real good!
I like the idea about padding the bracket too.
__________________
2015 Jayflight SLX 287BHSW
2002 F-250 Extended Cab 4x4 6.8
Teconsha Prodigy P3 Brake Controller
Reese SC Weight Distrubition with sway control (12,000lb)
|
|
|
10-05-2016, 09:18 PM
|
#15
|
Senior Member
Join Date: Nov 2015
Location: Lakewood, WA.
Posts: 4,540
|
But hay now that I think about it, it still be a good ideal to have this setup.
__________________
2023 Jayco North Point 310RLTS
2022 GMC Denali Ultimate DRW
Retired Army MSG
|
|
|
10-09-2016, 11:20 AM
|
#16
|
Senior Member
Join Date: May 2016
Location: Way down here........FL
Posts: 2,099
|
You might try a bicycle tire tube, should be about right size to slip over.
Nice job!!!!
|
|
|
10-18-2016, 05:40 PM
|
#17
|
Lost in the Woods
Join Date: Oct 2016
Location: L.I.
Posts: 334
|
I feel you missed the boat on this one. The fit and finish are lacking the qualities that an experienced craftsmen would produce. Clearly the fabrication skills need work.
Lmao. Hope you appreciate my sensayuma. All kidding aside. Nicely done. Fabrication of custom fit one off products is my business. I enjoy these kinds of posts.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|