Ok, I know that I'm camping right now, but what's wrong with a little mod "on the road".
Since I had already installed a few Command Electronics #K-900-UPG LED board's in my TT and liked the warm white light they gave, I decided to install a new product by Command Electronics in my pass-thru storage area. Have had to use the flashlight at times to find things in this area, plus I thought it would be a good place for those times I don't have shore power available (which is often in my case).
The #007-60RE is a new indoor LED light assembly w/switch and puts out little over 200 lumens at a very low amp draw, which will make the battery bank happy. I believe that Command Electronics also has an outdoor version as well. This product isn't on their web site yet, but you can call them if your interested. http://www.commandelectronics.com/
Since my storage area already had 12V wiring running through it, splicing into the existing Jayco blue/white 12V wires was a no-brainier. I chose a location that doesn't get any cargo interference and easy to access the on/off switch without fumbling around (12V green/white wires run to exterior side marker light hidden behind new LED wires).
Took the following pic in the evening, no flash, just a little campground street light shadow over my shoulder.......,
Now let there be light.......,
Now that was an easy mod...., now I'm bored...let's see.........