My 17Z mods

[my toys]

You can check out my mods: General mods http://outdoors.webshots.com/album/578459595fvqQNt
Rear bed mods http://community.webshots.com/album/579074786jAPtLb
Rear bed mods done http://outdoors.webshots.com/album/580528072lRhxcf

[elstonian]

Hello, what kind of hooks did you use to hold the pvc for the shower curtain rod? and also wondered how you attached the screen to the exit window....thanks

[29BHS ECO]

elstonian-- We used velcro on the window trim and nylon screen and a layer of black duct tape ( cut to 1/2'' wide) on the finish side of the screen to help stick to the velcro.I guess we made a screen sandwich . Larry

[my toys]

I believe the hooks are for electrical piping. I just found them in my workshop. I used velcro and plastic screen for the exit window.

[clearymj]

How did you attach the awning mat holder to the A frame?

[my toys]

I used metal banding strap and bolted it to the frame just under the tube.

[my toys]

I added a few more mods. Check them out.

[Jagiven]

Why did you do the outside shower mod?

[my toys]

1 When I showered outside, I could not turn the shower head off with one hand.
2. It is much easier to stow the shower hose since the shower head now comes off. I have the holes blocked off that were cut to shove the extra hose inside for storage. It was just an access point for bugs in my opinion.
3. Now I can hook up any water hose if I need more length.
4. Because I like to tinker with things. Just something I hadn't done yet.