Sink covers for Redhawk 26X1

[CapeCodFlyer]

Went to Walmart and picked up a couple of poly cutting boards. Made a cardboard template of the radius corners on the sink in the MH. I used a masonry blade on a Skill saw to trim the cutting board to size, then used an orbital sander to finish off the rough edges and round the corners. Fits perfectly into the double-bowl sink and each one easily stacks on the other if only one sink bowl is needed. Instant extra counter space. Cost of project was less than $20 for both cutting boards vs. $30 to $35 each from Camco.

[LynnAllen02]

Nice job! Looks really great! Did you color it to match the sink like that?

[CapeCodFlyer]

Thanks! Easy project to do. Actually, the cutting boards are white while the sink is ivory. Still looks pretty good although the color is not an exact match.

[genxrainman]

Looks great!


Sent from my iPhone using Tapatalk

[Wildhorses24]

Great Job! I know what I'm doing this weekend.

Sent from my SM-G930V using Tapatalk

[Wildhorses24]

Copied. Thanks for the idea! I like your facet too!

Sent from my SM-G930V using Tapatalk

[CapeCodFlyer]

Great job! Glad you liked the idea. I used the covers last week during the initial shakedown and was quite pleased. Perfect place to put the coffee maker, then worked out perfectly for the dish drying rack; allows water to drain down through.

[Wildhorses24]

Originally Posted by CapeCodFlyer

Great job! Glad you liked the idea. I used the covers last week during the initial shakedown and was quite pleased. Perfect place to put the coffee maker, then worked out perfectly for the dish drying rack; allows water to drain down through.

I made mine a hair tight too, so no noises on the road [emoji6] [emoji106]

Sent from my SM-G930V using Tapatalk