Originally Posted by chas111
Do you have parts list and plans?
Don't really have a list or plans...
Can help you out
Makes two sets/one for each side
1 each 4X4X96" Don't need to be that long...just what I had
2 pieces of all thread 18" long--I used 3/8 that's what I had
Nuts and washers to fit the above...Had to run to Lowes for them
Measure out between the tires and add a bit to separate them--mine was about 5 1/2" cut on the short side
Cut a 30 degree angle with your miter saw with your measurement on the short side(Again mine 5 1/2") might need to adjust for your tires size and spacing
Drill a hole through the center for the all thread to fit
Add washers and nuts
Set oven temp at 325---wait wrong forum...LOL
They worked out great for us...
I guess it you had to but the 4X4 and all thread it would run about $15-20
One last note...you will see the wedge chocks still there. You still need them to keep you TT in place after you unhook
These are installed after you unhook and level your TT