|
04-27-2014, 06:02 PM
|
#1
|
Junior Member
Join Date: Apr 2014
Location: Ewing
Posts: 29
|
Gravity Fill Water Leak
Maybe someone can help me out and tell me if I'm doing something wrong. We filled out water tank in the Whitehawk 33bhbs today to sanitize it. When I pulled the hose out, water spit back out at me with some force and nothing ever came out of the overflow. When I came inside I found water leaked underneath the sink and was coming out from underneath the drawers. After toweling it up and running fans, etc to dry it, we drained the water an refilled it. This time my wife kept the hose running a distance from the fill location but every once in a while we could hear it really start to gurgle and we would pull the hose back and then you would hear a huge rush of air and some water would spit back. When ever this happened a small amount of water would leak inside from where the tank hose is connected to the fill location. Eventually we just kept pulling the hose out every minute or so to avoid the air purge and leak. However once we go the tank full, water came back out of the fill point and nothing came out from the overflow! I had a 3/4 inch clear tube attached to my hose to fill the tank, so there was room around the hose in the fill point for air to get in. Anybody else have this problem? Any suggestions????
|
|
|
04-27-2014, 06:23 PM
|
#2
|
Junior Member
Join Date: Dec 2013
Location: N Iowa
Posts: 28
|
Your vent/overflow is pinched or plugged so your tank builds up pressure.
__________________
Retired
2014 351 RLTS
2016 Ruby Red F350 Dually
|
|
|
04-29-2014, 12:18 PM
|
#3
|
Senior Member
Join Date: Jun 2010
Location: Saskatoon Sask Canada
Posts: 10,714
|
This is the best thing you can get for filling your fresh water tank.
http://www.campingworld.com/shopping...ure-fill/31795
__________________
Seann
2004 Chev Silverado Duramax optioned past the max. 2009 Jayco Eagle 308 RLS 900watts of solar, Lithium batteries (400amp hour), 2000 watt (4000 surge) whole house inverter.
145days boondockinig in2023 2022/151 2021[/COLOR]
93/2020,157/2019219/2018 206/2017,215/2016, 211/2015, 196/14, 247/13, 193/12
|
|
|
04-29-2014, 02:41 PM
|
#4
|
Senior Member
Join Date: Mar 2013
Location: CENTRAL NEW YORK
Posts: 984
|
Quote:
Originally Posted by Seann45
|
Yikes !! $26.99 !!! Should be $5 tops. I noticed alot of state parts we go to don't even have an end that would screw on to it making it useless for us anyway.
__________________
2013 33 RLDS
2004 Chevy Avalanche 2500 8.1
2019 Jeep Cherokee Limited 3.2
2016 CTS 4 2.0T
2001 Oldsmobile Aurora 4.0
2015 Chrysler 200C AWD
|
|
|
04-29-2014, 08:32 PM
|
#5
|
Senior Member
Join Date: Aug 2013
Posts: 206
|
Mets721,
I didn't have that problem when I filled/sanitized my tank last fall. my overflow worked with no problem too.
It wouldn't suprise me if the overflow is pinched as 351rlts mentions. When I was winterizing last fall I noticed a 110 V romex wire weged between some plywood and the outside wall under the kitchen cabinet. I can just imagine the insulation getting rubbed through after a few thousand miles.
Get to know your trailer and check everything! Just to be safe.
I'm sure interested in why you are having this problem though, especially since it is spitting back at you.
__________________
Tim
2014 Whitehawk 33BHBS
Equilizer WDH
2023 F350 4x4 Crew Cab 6.7l 3.31
2014 F250 4X4 Crew Cab 6.2 l 3.73 (sold)
2010 F150 4X4 Supercrew 4.6l 3.73 (traded in)
|
|
|
04-29-2014, 09:30 PM
|
#6
|
Senior Member
Join Date: Feb 2012
Posts: 968
|
Quote:
Originally Posted by Seann45
|
I don't think this attachment will help your problem. As others have said, it sounds as if your overflow tube may be pinched or not working. And you can't count on your normal vent either, because when Jayco trailers have an overflow tube, they often never even connect a standard vent tube, figuring the overflow will also serve the vent purpose.
You will need to find the blockage or you may do serious damage to your FW tank. That plastic can inflate like a balloon if the air in your tank has no place to escape as you add water. Especially if your hose is pumping water in at a fairly strong velocity/pressure.
|
|
|
04-29-2014, 09:51 PM
|
#7
|
Senior Member
Join Date: Oct 2011
Location: Central California
Posts: 2,283
|
Quote:
Originally Posted by 33 RLDS
Yikes !! $26.99 !!! Should be $5 tops. I noticed alot of state parts we go to don't even have an end that would screw on to it making it useless for us anyway.
|
Water Bandit or Water Thief will help with the state park fittings.
http://www.amazon.com/Camco-22484-Wa.../dp/B000EDOSKG
__________________
2020 Ram 1500 5.7L
2007 Chevy Duramax LMM/Allison (Sold)
2012 Jay Flight 29QBH (Sold)
2012 Jay Flight 26BH (Sold)
|
|
|
04-30-2014, 12:00 AM
|
#8
|
Senior Member
Join Date: Dec 2010
Location: North Idaho/Arizona
Posts: 5,446
|
Perhaps the inlet hose to the tank needs to be tighter. Even if the vent tube isn't working you should not have a leak in the trailer. If it is not venting enough it will build up a small amount of pressure and spit back out the fill pipe. Try filling your tank slower.
__________________
2011 Eagle 330RLTS with just about every option.
2017 Silverado 1500 4x4 5.3 with tow package. (no, we don't tow the Jayco with it.)
2018 Surveyor 265RLDS well equipped.
Life in the slow lane is still life.
|
|
|
05-02-2014, 07:48 AM
|
#9
|
Senior Member
Join Date: Jun 2010
Location: Saskatoon Sask Canada
Posts: 10,714
|
Quote:
Originally Posted by clubhouse
|
They have those fittings on the supply pipe because the water system there cannot handle the load that RV's put on it..
__________________
Seann
2004 Chev Silverado Duramax optioned past the max. 2009 Jayco Eagle 308 RLS 900watts of solar, Lithium batteries (400amp hour), 2000 watt (4000 surge) whole house inverter.
145days boondockinig in2023 2022/151 2021[/COLOR]
93/2020,157/2019219/2018 206/2017,215/2016, 211/2015, 196/14, 247/13, 193/12
|
|
|
05-03-2014, 10:31 AM
|
#10
|
Senior Member
Join Date: Jan 2014
Location: Greater Grand Rapids
Posts: 1,392
|
You don't mention the model year of you Whitehawk. If it's still under warranty, I'd sure contact your dealer for an inspection. Neither the spitting, nor the leaking should occur.
__________________
2013 Eagle 266RKS
2011 Ford F-150 w/3.5L Ecoboost & H.D. Tow Package
|
|
|
05-03-2014, 08:06 PM
|
#11
|
Senior Member
Join Date: Jul 2013
Location: Renton
Posts: 517
|
Quote:
Originally Posted by Seann45
They have those fittings on the supply pipe because the water system there cannot handle the load that RV's put on it..
|
I found a labeled RV fresh water fill station in CA that had no threads. Had I not had a water bandit I would have been SOL.
__________________
Michael
Old setup:
2004 Chevrolet Silverado 3500 LT with a 2004 Jayco JayFlight 29BHS
2014 Greyhawk 31FS with a 2007 Tahoe toad
New setup:
2014 Thor Palazzo 33.3 with a 2017 Ford Explorer toad
|
|
|
05-04-2014, 05:47 AM
|
#12
|
Junior Member
Join Date: Apr 2014
Location: Ewing
Posts: 29
|
Well, I called my dealer and spoke to the service department. I was told that there is a small, circular, relief screen at the 11o'clock position when you look at the fill. He told me to blow compressed air into it because it may have become blocked and that will definitely cause the gurgling and spitting because air cannot escape. Compressed air will apparently blow the blockage, probably a small amount of water, back into the tank. Well I checked that screen and it's blocked alright....it's not even hooked up to the tank. There's no tube connected to the back of it, instead it has a hard plastic plug attached to it. I have a 2014 Whitehawk 33bhbs, does anybody else have a gravity fill without this relief valve connected? The attached picture shows the rear of the fill and you can see the unattached relief in the 1 o'clock position.
__________________
Mets721
2014 Whitehawk 33bhbs
2014 F-250 Superduty Crew Cab 6.2l Gas 3.73
Equal-i-zer 1000/10000
|
|
|
05-04-2014, 07:57 AM
|
#13
|
Senior Member
Join Date: Feb 2012
Posts: 968
|
I see in your profile that you have a 2014. I'd definitely take it back to dealer for warranty repair. As I mentioned in my previous answer to your OP, it is apparently not uncommon for Jayco to not hook up the normal vent when they have overflow tubes that can serve the purpose of venting air. (mine is not hooked up either, but the overflow tubes also vent the air) It sounds as if your overflow tubes may be blocked as well. Definitely need to have it looked at or you may damage your FW tank.
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|