How to replace or paint white surrounds on door window trim
The white plastic trim (about 2 - 2.5" wide) around the glass window of the entry door and storage door on my X213 has turned a yellowish color from the heat and UV we get in Arizona - I suppose that is why at least.
It is easy to pop this off and replace it? Or I was thinking I could just pop it off and repaint it and get some more life out of the same one. Does anyone know if or how these can be popped off?
I have a Jayfeather 19H with the same yellow trim. I started to see if taking the trim off was feasable but didnt think it was so I used a tape and paper masker and masked off the siding on the trailer and masked the window and used a can of spray paint.
:USA::campfire:Jay & Rhonda 2006 Jayco 19H EXP
2009 Eddie Bauer Explorer
Did the same thing on my previous TT as Jay & Rhonda did. I cleaned the yellow area well, masked it off, primed it with a plastic primer, then spray painted it with white satin. Also did the exterior range vent. Never yellowed again.
AMAZING ROLL-OFF is the product to remove the "yellow".
It is a super strength cleaning product developed for boaters. I use it on our RV door window strips et al. Also use it to take off the "yellow" caused by saltwater on windsurfing boards. Aces hardware is where I bought it.
Richard & Marilyn
2010 Ford F150, V8, 5.4 liter
2010 Jay Feather Sport 165