replacing small tilt out window
Hello all, new member here. I have a 2006 jayfeather 27P that has the large window looking into the dinner table next to the door. has anybody replaced the smaller window below it that tilts out and has the screen. Some looser pulled it outward and pushed the screen in to see if they could get inside i guess while it is parked in my driveway. The rivets that hold the crank mechanism to open/close window got pulled out from the window frame itself. Not sure if i can drill new holes in different location or if that would change the crank angle and not allow it to open correctly. I have not looked at it to close yet to see if this part of the window can be replace or if the entire window is one unit. Any advice is welcomed. Thanks.