Slide out on a 2017 27 DSRL whitehawk

[Davecarol]

I was de winterinzing my 27 DSRL whitehawk and looked underneath my slide out. If for some reason the slide does not want to go back in I know you can manually put it back. Question is does anyone know underneath you do this?

Dave

[SOMBATFAMILY]

Should be under the access panel if your underbelly is cover. You will need to get under the trailer.

[Davecarol]

When you say Access Panel, where is this located, My underbelly is sealed

[SOMBATFAMILY]

In my trailer, there is a part of the underbelly cover that is cut so you have access to the slide motor. Look for a square cut out section. Undo the screws and you should have access to the manual retract for the slide out.

[Davecarol]

I will have a look.

Thanks for the Info.

Dave

[WyEm]

Originally Posted by SOMBATFAMILY

In my trailer, there is a part of the underbelly cover that is cut so you have access to the slide motor. Look for a square cut out section. Undo the screws and you should have access to the manual retract for the slide out.

On my 2016 27DSRL, the square patch in the underbelly is located on the door side of the trailer just forward of the wheels. I assumed that was the access for the slide motor in case I ever needed to manually crank it in, but I've never unscrewed it to look.

[Davecarol]

Thanks for the info, found it.

Dave