E05 Code

[Christo360]

Alright folks so Ive got this E05 code today on my Pinnacle. Everything in the camper is working just fine but the invertor display in the kitchen is still blinking E05. Xantrex PRO XM 1000.

-I turned off then back on the GFCI breaker. No results.

-I turned the battery off for about 30 seconds and then turned it back on. That didn't work.

-I turned the Power Convertor breaker off and then back on but no results.

-I turned the Main Leg breakers off and then back on but no results either.

(in this order)

I have read two other E05 posts on this site but couldn't figure out the answer. If someone could point me in the right direction that would be great.

Thanks.

[Seann45]

Here you go
Xantrex PRO XM 1000 Owner's Manual (Page 56 of 77)

[Christo360]

Of course I've already consulted the manual. Doesn't tell me where the circuit is at, how to remove it.

[Grumpy]

It is usually one of the kitchen outlets. I would unplug everything in the kitchen and then turn the Inverter off and back on. (the green button on the Inverter panel)

[Kevin and Beth]

I got the E05 a couple times this summer when the campground we were in had some power/voltage drops. I was able to shut off the main at the electrical box on the site, wait about 10 minutes, restart and the faults reset. Haven't had issues since.