Originally Posted by SmokerBill
Wasn't there a thread here somewhere that described how a new LED lamp can be installed in one of these fixtures, without having to replace the entire thing?
I don't recall seeing that specifically, though it's been discussed in several different places. From what I can tell from pictures of the fixtures, you could probably replace it if you're handy with wires and soldering; the elements are soldered onto the wires from the switch IIRC. In that case I would probably try to put a "female" receptacle in the fixture as opposed to re-hard wiring a new element. But really, the fixtures themselves aren't that expensive (I just bought one from Amazon for like $10), and you'd have to buy the new element anyway.
But again, if you're under warranty, give your dealer a call. My dealer is good about me providing the labor and them providing the parts. It saves us both a whole lot of time and effort (and money).
Of course, all of this assumes it's truly the fixture that's bad. I guess I would back up a few steps and put a volt meter on the wires just to make sure...
2014 Jay Flight 28 BHBE
2015 RAM 2500 6.4L HEMI, Tradesman 4x4, 3.73
Blue Ox SwayPro (BXW 1503)
Upgraded from an REI internal frame backpack and a Eureka 1/2 dome tent!