|
07-12-2015, 02:12 PM
|
#1
|
Junior Member
Join Date: Mar 2015
Location: New York
Posts: 22
|
Mud flaps to protect truck and trailer
Installed a set of Duraflap Mud Flaps today.
Front Install [Model FF 2 11]
Rear Install [Model FF 2XL 11]
Install went pretty easy. Removing the and reinstalling the rear support bracket was a little more difficult than I expected. Two rear flaps don't quite line up evenly on both sides, not quite sure why. Overall satisfied with the look and quality of the product.
Truck is a 2015 F-250 CC SB Diesel 4x4 with 20" wheels
__________________
2015 Jayco Eagle 314TSBH
2015 Ford F-250 CC SB PSD
|
|
|
07-12-2015, 07:24 PM
|
#2
|
Senior Member
Join Date: Dec 2012
Location: Southern Indiana
Posts: 3,209
|
Nice, I put the Huskies on mine. [ATTACH[/ATTACH]
__________________
2012 Eagle 320 RLDS
2017 Ford F-250 FX4 Crew STX 6.2l
3.73 E-locker
|
|
|
07-12-2015, 07:40 PM
|
#3
|
Junior Member
Join Date: Mar 2015
Location: New York
Posts: 22
|
@TCNASHVILLE it is hard to tell. Are those low in the back as mine appear?
__________________
2015 Jayco Eagle 314TSBH
2015 Ford F-250 CC SB PSD
|
|
|
07-12-2015, 08:17 PM
|
#4
|
Senior Member
Join Date: Nov 2014
Location: Trussville, Al
Posts: 2,093
|
Gives me something else to add to mine lol
__________________
Ron, Barbara & rescues Beamer (Lab mix), Buddy (Cavalier spaniel), Ruger (Golden retriever), Stanley (Bassett/Springer mix) and 3 grandsons
2012 Jayco Feather 29L BH
2015 Chevy 2500 HD Duramax and Equalizer WDH
|
|
|
07-13-2015, 01:59 PM
|
#5
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Here's a set of rock guards homemade for my truck. They slide into the OE hitch and are held in place with snap pins.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
07-14-2015, 01:34 AM
|
#6
|
Member
Join Date: Jun 2014
Location: calgary
Posts: 87
|
QUOTE=norty1;321295]Here's a set of rock guards homemade for my truck. They slide into the OE hitch and are held in place with snap pins. Attachment 19193[ QUOTE]
Very nice job & they look great. I have the Rock Tamers & they work well to...
__________________
2014 Jayco Eagle 30.5 RLS | Curt 20K sliding Hitch | Champion 3100 Inverter Generator | 2012 Ram 3500 6.7L Cummins CC Laramie Longhorn
|
|
|
07-14-2015, 06:14 PM
|
#7
|
Senior Member
Join Date: Dec 2012
Location: Southern Indiana
Posts: 3,209
|
Quote:
Originally Posted by BruteForceNewYork
@TCNASHVILLE it is hard to tell. Are those low in the back as mine appear?
|
I don't think so, but they do a pretty good of protecting the running boards and tailpipe. I looked at quite a few and the Huskies had the right price and they were molded to fit the wheel wells with just a screw in application. Life time guarantee as well.
__________________
2012 Eagle 320 RLDS
2017 Ford F-250 FX4 Crew STX 6.2l
3.73 E-locker
|
|
|
07-14-2015, 07:16 PM
|
#8
|
Senior Member
Join Date: Oct 2013
Location: Black Mountain
Posts: 138
|
Norti1, great idea! Did you use box tubing to slide inside or piece of flat stock? I have the same truck and thinking how to take up for the space inside the tube to keep the flap sturdy.
__________________
2011 Powerstoke
2013 334RBTS
East Bound & Down- We Love Camping :)
|
|
|
07-14-2015, 07:20 PM
|
#9
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Quote:
Originally Posted by Firefighter78
Norti1, great idea! Did you use box tubing to slide inside or piece of flat stock? I have the same truck and thinking how to take up for the space inside the tube to keep the flap sturdy.
|
It is a piece of angle iron with a bend to match the angle of the hitch tube. Just bolted rubber mat from Tractor Supply on it with a piece of flat stock to hold it in place. On the exhaust side, there is a metal baffle to keep the exhaust off the rubber flap. I cut the rubber to ride 1 inch off the pavement when I am loaded.
If you want some more pics, I'll be glad to provide.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
07-14-2015, 07:38 PM
|
#10
|
Senior Member
Join Date: Oct 2013
Location: Black Mountain
Posts: 138
|
I would appreciate some more pics. So it would be like a 2.5" light weight angle iron, heat and bend it to make it straight?
Thanks!
__________________
2011 Powerstoke
2013 334RBTS
East Bound & Down- We Love Camping :)
|
|
|
07-14-2015, 07:39 PM
|
#11
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Quote:
Originally Posted by Firefighter78
I would appreciate some more pics. So it would be like a 2.5" light weight angle iron, heat and bend it to make it straight?
Thanks!
|
I'll post some pics tomorrow that will clarify my comments.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
07-14-2015, 07:43 PM
|
#12
|
Senior Member
Join Date: May 2014
Location: Chicago
Posts: 137
|
Quote:
Originally Posted by Calgary5er
I have the Rock Tamers & they work well to...
|
As do I! Love those things!
__________________
2008 Jayco 1207
|
|
|
07-17-2015, 08:34 AM
|
#13
|
Member
Join Date: Jun 2015
Location: Cumming
Posts: 69
|
Weathertech, like them, easy to install. Look good.
__________________
2015 Pinnacle 36 FBTS
Cummins Onan RV QG 5500 Generator
2015 Ford F350 Lariat FX4 CCLB DRW 6.7 PSD.
Curt Q20 Hitch. Air Lift 5000 Ultimate Air bags. Airlift Wireless One compressor.
|
|
|
07-17-2015, 05:22 PM
|
#14
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
07-17-2015, 08:33 PM
|
#15
|
Site Team
Join Date: Feb 2014
Location: Charleston
Posts: 1,714
|
Norty.. I think I might steel this idea. Going to have to take a look at my hitch tomorrow and make sure it is open on the ends.
__________________
Can't find what you're looking on JOF? Try:Jayco Owners Forum Custom Google Search
TV 2005 Ram 3500 CC LB SRW Cummins POWER
2014 Jayco Jayflight 32BHDS Prodigy P3 brake controller.Reese dual cam 1400/14000
|
|
|
07-18-2015, 05:06 AM
|
#16
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Steel away, that's how I go it. If you need any more detailed pics, let me know.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
07-19-2015, 08:16 AM
|
#17
|
Senior Member
Join Date: May 2013
Posts: 1,588
|
I put a set of WeatherTech bolt on splash guards on my truck - they look factory equipped and require no drilling. They come about half way down my big Duratracs which are a knobby tire that kick rocks back, so I also run a RockSolid Tow Guard when towing my trailer. I tack welded the attachment bracket to the shank, and the guard bolts onto that. The bolt-on only method only held the guard on by friction and wasn't secure enough for my liking. It works great and keeps the trailer cleaner and free from stone dents.
__________________
2013 F-150 EcoBoost MaxTow, Roush tuned (415hp 506tq), lifted on 33s, R.A.S.
2013 Jay Flight 28BHS Elite (Equalizer 10K hitch)
|
|
|
08-12-2019, 07:40 PM
|
#18
|
Junior Member
Join Date: Aug 2019
Location: GP
Posts: 1
|
I prefer the longer Duraflap mud flaps. They do a great job protecting my trailer and boat as well as my truck. No mud on my running boards
Very easy drill-less installation. Mine are centered to my tires. If yours are not send a photo or two to them to see why not. They helped me a lot when I had questions.
I don't want to put that long heavy one on the back if I do not have to. My trailer is clean when I get where I am going. No new rock chips.
|
|
|
08-14-2019, 10:55 AM
|
#19
|
Senior Member
Join Date: May 2016
Location: Way down here........FL
Posts: 2,099
|
That's a pretty cool idea Norty!
__________________
Jack
2016 Pinnacle 36 KPTS
2016 F350 Lariat CC LB dually 6.7
|
|
|
08-15-2019, 09:25 AM
|
#20
|
Senior Member
Join Date: Jan 2018
Location: Iowa
Posts: 139
|
Quote:
Originally Posted by norty1
Here's a set of rock guards homemade for my truck. They slide into the OE hitch and are held in place with snap pins. Attachment 19193
|
That is a good setup. If you really want to make the most of it, try a set of Eco Flaps on it. I use Eco Flaps. They are substantially more aerodynamic while providing excellent protection. The don't curl or wave while going down the road and need no weight at the bottom to prevent that.
https://ecoflaps.com
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|