Hybrid end leak?
2013 X17A. Bought it last April and this was our first winter with it. I had it winterized and some other work down on it. Dealer closed it back up and folded the mattress covers into the mattresses and shut it all up.
Opened it the othe dray to find standing water on the tent material in the back and front. It was worse in the back. And, mildew spots all over the tent as well. A little mildew on the inside also.
Is it possible that the tent ends are not water tight even with the rubber seal around the edges? I never had issues last summer during rains and always folded it up dry.
Can condensation form inside and collect in that area? There is no moisture inside the trailer. (good news)
When I both it, the dealer had to replace the front tent material. (Fix #1). Then, the metal bar holding down one side of the tent material came loose and had to be reattached (fix#2). Now, it looks like in the process of doing that fix, they have pulled the tent away from the attaching screws in the opposite upper corner, leaving a big air gap (fix #3 now).
Any advice?
Come on Camping World! You can do better than this!
Jeff
|