Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 06-30-2017, 06:16 PM   #21
Member
 
Decade's Avatar
 
Join Date: May 2017
Location: Vancouver, BC
Posts: 56
This is what has happened so far. I am not a carpenter, so please forgive as it does not look good.

1) Build up the box for batteries.







2) Loaded batteries, connected.


3) This is how it looks with the 2 propane tanks moved forward.


4) Also upgraded an electric tongue jack.




Will add some switches and battery monitor in a later time. However, it's now loaded with 660ah battery bank. Can't wait to try it out at camp.
__________________

Decade is offline   Reply With Quote
Old 08-11-2017, 12:34 AM   #22
Member
 
Decade's Avatar
 
Join Date: May 2017
Location: Vancouver, BC
Posts: 56
Quote:
Originally Posted by Mustang65 View Post
Yes, when the TT is plugged into shore-power it charges the batteries. The TV will supply a small amount of current back to the TT batteries, it is limited in the Amps it can give the batteries due to the small gauge wire in the truck to the rear plug.

Not sure as to what you are asking about "What is charging current?", do you mean what will the amount of current be as in 2 amps 20 amps or an easy definition of what Charging Current is?

Don
Any idea where is the power panel and (the built-in charger) located? Should that be closed to the fuses box? The manual didn't say it well.

Anyone familiar with the Hybrid Trailer, please advise. I plan to install the inverter to power up the 110v socket with the battery for dry-camping. Thanks.
__________________

__________________
- 2005 Jayco Jayfeather 23B
Decade is offline   Reply With Quote
Old 08-11-2017, 10:57 AM   #23
Junior Member
 
Join Date: Mar 2016
Location: Suffolk
Posts: 1
Decade - box looks great - don't doubt your carpentry skills. I'm a little concern about the electrical connections on the 'L' bracket. Its hard to see in the picture but it looks like you used a bolt thru the 'L' bracket to make a main power point connection. Even thou the brackets are screwed into wood (non conductive) - there maybe a possible short if the wood gets wet. If I were you I would use a terminal block - something like this one to insolate the connections.


https://www.racerpartswholesale.com/...yABEgLjMvD_BwE
Macaw is offline   Reply With Quote
Old 08-11-2017, 11:05 AM   #24
Senior Member
 
Join Date: Aug 2015
Location: Ottawa, ON
Posts: 968
B is the best choice for parasitic cable loss. There is a really good post here somewhere where the math is explained. Might be in the Solar group. B provides the most even charging and drain on the batteries, although as Mustang points out, running to a common connection point is even better.
__________________
2011 Jayco X19H (purchased 2015)
2008 Jayco 1007 PUP (purchased new, traded for the X19)
2012 Chev Traverse LT with TP
bankr63 is offline   Reply With Quote
Old 08-11-2017, 11:28 AM   #25
Senior Member
 
Join Date: Dec 2015
Location: AZ
Posts: 559
Quote:
Originally Posted by RoyBraddy View Post
If I was doing this for four 6V batteries i would want them next to the trailer front. This would give more frame support for extending the battery box out on both ends of the trailer trailer frame.. The down side of this of course your sloping front may not allow for opening the battery box. TORKLIFT has the slide off battery box lids verses the ones that are hinged to go up...

Have no idea what would be involved with moving the propane tanks on your trailer...

Just a thought on my part...

My three batteries have just started to go bad on me last season so I will be using the same battery guide angles to mount a battery box for 4 each of the 6VDC GC2 batteries across the trailer tongue of my trailer setup...

You can see the rails here in this photo...

Roy's image

This is what my TORKLIFT battery box with the slide off lid is going to look like... This box is some 58 " long and will come out even with the second vertical post on the front deck on each side... I am pretty much finished with my box buildup waiting now on finding GC2 batteries... Always a money thing here hehe...

Google Image

Roy Ken
Just curious how old are your batteries. We are just finishing are second year! Thanks
bdreinv is offline   Reply With Quote
Old 08-11-2017, 12:15 PM   #26
Member
 
Decade's Avatar
 
Join Date: May 2017
Location: Vancouver, BC
Posts: 56
Quote:
Originally Posted by Macaw View Post
Decade - box looks great - don't doubt your carpentry skills. I'm a little concern about the electrical connections on the 'L' bracket. Its hard to see in the picture but it looks like you used a bolt thru the 'L' bracket to make a main power point connection. Even thou the brackets are screwed into wood (non conductive) - there maybe a possible short if the wood gets wet. If I were you I would use a terminal block - something like this one to insolate the connections.


https://www.racerpartswholesale.com/...yABEgLjMvD_BwE
Good advise. I will look for that. Thanks.
__________________

__________________
- 2005 Jayco Jayfeather 23B
Decade is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 11:41 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.