I recently purchased a 2002 kiwi 17a. I want to replace the step. Of course when I went to remove the old one the bolts just spin. If I open the membrane under the camper, can i get a wrench on those bolts then reseal the membrane? Thanks.
Another option is to soak the bolts good with penetrating oil, then use a impact on the fastener. Spinning the bolt at a high speed and with short burst has saved me many of hours. Hope this helps you.
Robert
Has a new wood floor which was installed before I purchased it. Don't think the air gun will work as they spin pretty freely, but, worth a try. I did soak the nuts with pc blaster.
Thinking about trying to cut through nuts with sawzall and knock them off.
Thanks.
Linear Mode
