Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 07-20-2016, 05:10 PM   #11
Member
 
Join Date: Nov 2015
Location: Washington
Posts: 87
Hello and welcome to the forums. Lots of friendly advice here. It could be that your location was on a well. We have family in Eastern Washington and Idaho who are on well water and every time we visit and take showers it always smells like rotten eggs. It's harmless and is only present when the water is hot.

Hydrogen Sulfide Wellowner.org
__________________

__________________
Jake
2016 Ford F150 XLT 2.7 EcoBoost
2016 Jay Feather X17Z
Tekonsha P3 Brake Controller
EAZ-Lift Weight Distribution Hitch w/Sway Control
jsims is offline   Reply With Quote
Old 07-20-2016, 06:08 PM   #12
Senior Member
 
wags999's Avatar
 
Join Date: Jan 2015
Location: Surprise
Posts: 1,326
You may want to check and see if you have an anode rod in your hot water tank. If so it is part of the drain plug and if partially eroded you may want to replace it.

Welcome and Enjoy your new to you TT.
__________________

__________________
2011 Toyota Tundra double cab
2015 27RLS
wags999 is offline   Reply With Quote
Old 07-20-2016, 08:05 PM   #13
Junior Member
 
Join Date: Jul 2016
Location: Rushville
Posts: 4
No anode as I have an Atwood heater...and I did check with the campsite...the water was city water and did not smell in the camps showers so I am sure it was an issue with my unit.

I sanitized everything, yet to try it out but will in the next few days
PennYanguy is offline   Reply With Quote
Old 05-19-2017, 07:59 AM   #14
Junior Member
 
Join Date: Apr 2017
Location: Victoria
Posts: 12
We bought a Jack It A frame bike rack. Works great!
MagooIsBoo is offline   Reply With Quote
Old 05-20-2017, 04:30 PM   #15
Junior Member
 
Join Date: May 2017
Location: Northeast
Posts: 15
Following for the front bike mount question!
jholler is offline   Reply With Quote
Old 05-20-2017, 04:33 PM   #16
Junior Member
 
Join Date: May 2017
Location: Northeast
Posts: 15
Quote:
Originally Posted by MagooIsBoo View Post
We bought a Jack It A frame bike rack. Works great!
Does that fold down or remove easily to allow the front bed on the TT to fold down?
jholler is offline   Reply With Quote
Old 05-22-2017, 10:38 PM   #17
Junior Member
 
Join Date: Apr 2017
Location: Victoria
Posts: 12
Hi, on our hybrid with the Jack It bike rack, we do have to take off the top part of the rack, (if you look at a pic of the rack with bikes on it, it is the part which the bikes actually rest on) which is quite simple to remove with one quick release clip in order to get the bed down, but the main mounting post of the rack stays attached to the A frame of the trailer. There is about two inches of clearance from the bike rack main mounting post to the underside of the bed when it is down. I'll see if I can find a pic online for you. We already put the trailer to bed from this weekend. Here is an online image.

https://www.google.ca/imgres?imgurl=...act=mrc&uact=8
MagooIsBoo is offline   Reply With Quote
Old 05-22-2017, 11:00 PM   #18
Junior Member
 
Azbirddog's Avatar
 
Join Date: Oct 2015
Location: Bullhead City
Posts: 25
WELCOME Enjoy your ntu camper.
__________________
Jim and Bea
2009 Jayco Feather 17c
2012 Nissan Titan
Honda 2000 gen
Pee Wee and Razzie
Azbirddog is offline   Reply With Quote
Old Yesterday, 02:41 PM   #19
Junior Member
 
Join Date: May 2017
Location: Northeast
Posts: 15
Quote:
Originally Posted by MagooIsBoo View Post
Hi, on our hybrid with the Jack It bike rack, we do have to take off the top part of the rack, (if you look at a pic of the rack with bikes on it, it is the part which the bikes actually rest on) which is quite simple to remove with one quick release clip in order to get the bed down, but the main mounting post of the rack stays attached to the A frame of the trailer. There is about two inches of clearance from the bike rack main mounting post to the underside of the bed when it is down. I'll see if I can find a pic online for you. We already put the trailer to bed from this weekend. Here is an online image.

https://www.google.ca/imgres?imgurl=...act=mrc&uact=8
Thanks! It also looks like you have to use their electric jack...is that correct?
jholler is offline   Reply With Quote
Old Yesterday, 06:15 PM   #20
Junior Member
 
Join Date: Apr 2017
Location: Victoria
Posts: 12
Hi, no we are still able to use our original jack. My hubby did have to remove the original jack to place the bike mount on, but then screwed everything right back together. It was a little finicky to do by himself, a second set of hands would have been helpful to screw and hold things together, but entirely doable on his own.

One helpful piece of advice is to set the cradle hooks and the mount pins for the tires with the Y frame on the ground first. Trying to adjust the cradle mounts with the bikes while the frame is in the air is awkward.
__________________

MagooIsBoo is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 11:11 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.