Originally Posted by Jayco Jacqui
This is not really a Jayco issue but by oven is not working. I can light the pilot while holding the knob in but when I try and turn the stove on the pilot shuts off. I tried replacing the thermocouple but no luck there. When youopen up one of these ranges there are very few parts at all so I can't believe this is a very hard Fix. I am hoping maybe someone who has had this problem might be able to point me in a direction
Been there before. When your pilot does light the flame is very small, yes? Critters and dusty crud is the culprit in the gas tube. Take the smallest tie wrap, stick it in the tube where the gas should come out and wiggle it around. If you have a can of compressed air like you would use for computers and the like with the snorkel tube,
(avail. office supply store) follow it up with a blast of air. Your flame is probably too small to open the thermocouple/gas valve. Give it a try, take you all of 5 min.