Originally Posted by Ironbutt
Great installation ncooper96! I am going to follow your lead with my 2012 x17z.
Question...Did you drill the 1/2 inch hole just to run the power and coax cables down to the outlets? If so you must have drilled a second hole below the stereo unit it exit the cables to the power/coax inputs.
Also ..I have an aux input on the front of the Jensen stereo...is that the input you used to feed the audio from the TV to the trailer speakers?
This particular TV has an external power supply like a laptop computer. I mounted the power supply behind the stereo and the power cord just runs along the side of the cabinet, there is no second hole. The power cords runs up the wall from the outlet into the 1/2 hole to the power supply, then from the power supply back through the hole to the TV. My Jenson stereo has aux inputs on the back and front of the stereo, I used the cable listed in my initial post to hook up the audio feed to the aux input on the back of the stereo. The coax cable for the antenna also runs up the back side of the cabinet along with the power wire and for the most part they are not noticable. I'll try and take some more pictures later today if I have time.