I have a 2014 Eagle Premier 37bhfs..heat was working fine. When I turn the thermostat on the blowers are going fine but the furnace is not firing. Full propane tanks, checked fuses, water heater is firing fine..I am at a loss! Any advice would be appreciated
If you don't hear the igniter firing, could be a board. If you can see the furnace, you may be able to notice a flashing light on it. Turn t-stat all the way down shut off furnace for 5min . Retry it. If it lights for 30 seconds and quits could be igniter. Igniter not only sparks and lights the flame but also sends a feedback signal to the board telling it theres fire. Sounds weird but that's was my experience. Furnaces should not be worked on when children or religious wives are present due to the number and variety of expletives you will go through! I had to pull the kitchen sink to get the furnace out.