Greyhawk Water Pump problems

[Jump]

Hello all,

I hope you can help me with my problem. I recently bought a 2014 Jayco Greyhawk 29ks. My problem is with the water pump. Firstly, the illuminated light switch is constantly lit. Also, the pump will run even after I have removed all three pump switches. Bathroom, outside kitchen and outside shower. I have to pull the fuse to turn it off. The pump only does this when I first use it. I don't mean to say it just runs all the time, only after I've initiated use of the pump. When in city water use, the pump doe snot run, as it should.

This problem does not occur when the water switches are in city water, I.e., when connected to campground water. This only happens when I set the Water switches to normal, Boondocking.

I thought I had solved the problem, but it returned today when I drained the fresh water tank with the pump. All 3 switches out, ran until I pulled the fuse.

It seems as if the pump is hotwired. I've gotten the wiring diagram from Jayco and am attempting to trace wires.

I'm chasing my tail here. Help!!

Thanks,

Jump

[LkptRvPilot]

I also have a pump switch in the control panel area. Do you have an additional switch there also?

[Jump]

LkptRvPilot, you are my hero! Sure enough, that one was on.

That makes 4 switches I've found thus far. Wonder how many more I'll find?

Thanks again,

Jump