Originally Posted by LarryB41
The slide outs are not sealed when in. The carpets on the sides get covered with dust. Any suggestions?
The only furnace duct that has heat coming out of it is the one by the furnace.
The dealer said he was not able to correct either of the problem.
Does anyone have a suggestion to correct either problem?
Welcome to the forums.
Not knowing how much effort the dealer put into each task, not sure where to begin.
With the slide in, check for daylight coming through in the lower corners, and the condition of the large foam seal in each lower corner at floor level. It could also be that the slide needs to be adjusted to insure uniform wall seating when closed...., or the outer frame seal needs to be replaced.
If heat is only coming out at one vent, sounds like a plugged system or the duct work has come apart at some point. What happens when you cover the vent that produces heat?