Lights in slide out quit working

[jhamilton62]

I have a 2008 Designer 34 RLQS. The lights in one of my slides quit working. All other 12 volt lights and systems are working. Any suggestions on where to start looking?

[3'senough]

Did you check all the 12V fuses in the control panel? If not then I would go under the slide while extended and look for any "frays". There should be some flexible conduit under the unit with all the wires for that slide clustered.

[Parcany]

First check that the lights that are not working are not burnt out.Replace with light that you know are good. Then check fuses, if ok then go under slide and look for anything that might be crushed or broken. That is what I would do.