Overhead Dinette Light Out

[KampKaBob]

I am the New owner of a 2014 32TSBH. It is in perfect condition as previous owner and family used only 30 days in a move from Fla. back to Missouri. I have one light out in the over the dinette lighting group(2 flush mount lights on a wood fixture). Before I go tearing into it I was hoping someone else has had a similar issue and would share how to fix and or replace the light/bulb. Is it LED or Incandescent? Not sure how the frosted cover comes off...twist or pull? Thanks in advance for any help.


Bob and Kathy
2014 Jayco Jayflight 32TSBH
2007 Ford F-250 Super Duty XL 5.4 V8 4WD

[spoon059]

It is LED. You are likely within warranty period. I would take it to the dealer.

[Grumpy]

Originally Posted by spoon059

It is LED. You are likely within warranty period. I would take it to the dealer.

2nd owner, not transferable.

[KampKaBob]

I think it is a Halogen.

[John LLRV]

Unfortunately, there are 3 different ones listed for that year/model of trailer.

LIGHT,HALOGEN 20 WATT RECESSED 4.75" GLASS WITH SNAP IN LENS (3-MOUNTING SCREWS)
This one goes with MOST trailers...

LIGHT,LED 4 WATT RECESSED WHIT 4.5" 3500K WITHOUT LENS (SGREW MOUNT)
if your vin ends with E18V0370 or higher, i could be this one.

LIGHT,DOUBLE WHITE OMEGA WITH WHITE SWITCH BUT 0181382 LENS SOLD SEPERATE
if your vin ends with E18V0051-E18V00369

The Halogen lenses are like a 1/4 twist then they come off.

Good luck!

[rryman]

for what it's worth, it sounds like you have the same set up I have. The ones I have pull straight down and are held by three metal clips. Took some effort to get it to come down. The other ones over the living/kitchen area on ours are larger, and they turn about a quarter turn CCW and come loose.

[namusmc65]

If they are like this, they just pull straight down. I usually have to put a knife or something under the edge to get them loose.