|
04-04-2016, 06:02 PM
|
#1
|
Member
Join Date: Mar 2016
Location: Macomb
Posts: 54
|
Range exhaust vent not working - new trailer
My new 29.5BHDS 5th wheeler is 1 week old. When i tried the range exhaust fan it will not turn on. The light to the cooktop works but no fan. Does the exhaust flap have to be open to work? How do you even get the outside flap open? I reviewed all the wiring to the switch and to the fan and all is intact but didnt check with a multimeter. Should take back to dealer but 2.5 hrs away and will do so at a later date.
|
|
|
04-04-2016, 06:06 PM
|
#2
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,856
|
The outside vent should be open but it will run without it open. There are 2 mechanical tabs at the bottom of the vent on the outside. gently push up on them to release.
There still appears to be a problem. If you remove the filter under the vent hood, you may see the fan blades. You will know when it's on because it is noisy.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
04-04-2016, 06:16 PM
|
#3
|
Member
Join Date: Mar 2016
Location: Macomb
Posts: 54
|
Tried to open flapper - what a pain. I took the range vent a part and all the wire is entacted and connections made. The light is working but fan blades not spinning. Thought it might be something simple but not
|
|
|
04-04-2016, 06:18 PM
|
#4
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,856
|
It's always something!
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
04-04-2016, 06:42 PM
|
#5
|
Senior Member
Join Date: Sep 2010
Location: PNW
Posts: 5,195
|
The switch for the fan might be bad, or one of the wires might be disconnected from it. I'd check that. Could also be a bad fan motor.
__________________
Bill
2011 Dodge Ram 1500 HEMI Quad Cab
2011 Jay Flight 26BH
|
|
|
04-05-2016, 06:09 AM
|
#6
|
Senior Member
Join Date: Jun 2010
Location: Saskatoon Sask Canada
Posts: 10,726
|
use a multi meter and check for where there is power and not...
__________________
Seann
2004 Chev Silverado Duramax optioned past the max. 2009 Jayco Eagle 308 RLS 900watts of solar, Lithium batteries (400amp hour), 2000 watt (4000 surge) whole house inverter.
145days /2023 2022/151 2021[/COLOR]
93/2020,157/2019219/2018 206/2017,215/2016, 211/2015, 196/14, 247/13, 193/12
|
|
|
04-05-2016, 11:22 AM
|
#7
|
Senior Member
Join Date: Sep 2015
Location: Sioux Falls
Posts: 348
|
Have you checked the fuse? The fuse panel is right under the oven. Open it up and use a needle nose pliers to pull out and inspect the fuse. Now, if the light works and the fan doesn't, usually it's not the fuse. But, check it any way.
Quote:
Originally Posted by tledwards25
Tried to open flapper - what a pain. I took the range vent a part and all the wire is entacted and connections made. The light is working but fan blades not spinning. Thought it might be something simple but not
|
__________________
U.S. Air Force (1979 to 1994)
2016 Jayco 29.5BHDS
2015 Ram 2500 (6.7L Cummins Diesel)
Queen Creek, Arizona
|
|
|
04-05-2016, 11:53 AM
|
#8
|
Senior Member
Join Date: Dec 2011
Location: Upperco, Md.
Posts: 807
|
There is also an inline thermocoupler ahead of the fan motor. If you have created a lot of heat by cooking without the exhaust vent open, it will blow that thermocoupler. Only being a week old, that wouldn't seem to be the problem. Voltage tester would take the guess out of it.
|
|
|
04-09-2016, 07:37 AM
|
#9
|
Member
Join Date: Feb 2012
Location: Hunterdon County, NJ
Posts: 60
|
Ours didn't work on the first trip out either. I will have to ask DH but there was something "extra" he took out wiring wise and it worked fine after that. I want to say it was a switch. It was last year so my memory is going. It was not a fuse and the light worked. I will check with him and post.
__________________
2014 Jayco Eagle 324TSBH
2013 Chevy 2500 Suburban
3 kids (17,14,12)
2 Golden Retrievers, Cooper & Claude
:campfire: :campfire:
|
|
|
04-10-2016, 09:27 AM
|
#10
|
Member
Join Date: Feb 2012
Location: Hunterdon County, NJ
Posts: 60
|
Quote:
Originally Posted by Ewingfamily
Ours didn't work on the first trip out either. I will have to ask DH but there was something "extra" he took out wiring wise and it worked fine after that. I want to say it was a switch. It was last year so my memory is going. It was not a fuse and the light worked. I will check with him and post.
|
We talked last night. DH can't remember exactly but we think it was an in-line fuse or switch that we removed and the fan has worked great the last year since. Hope you were able to figure it out.
__________________
2014 Jayco Eagle 324TSBH
2013 Chevy 2500 Suburban
3 kids (17,14,12)
2 Golden Retrievers, Cooper & Claude
:campfire: :campfire:
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|