Wet Bolt Upgrade

[Marcm157]

Decided to pull the trigger on a wet bolt upgrade and at the same time want to add the MorRyde CRE3000 equalizer. I have Lippert Axles. Anyone know of any reason why the CRE3000 wouldn't work? All documentation I find is very generic.

I can't see not doing it while I have suspension apart for wet bolts but just want to make sure it's compatible.

[jasum]

I would call MORryde and ask...........

[2naEagle]

https://www.rvupgradestore.com/X-Fac...-p/15-9011.htm

Look at adding this while you are at it.

[SouthCo]

Originally Posted by 2naEagle

https://www.rvupgradestore.com/X-Fac...-p/15-9011.htm



Look at adding this while you are at it.

So you would need 3 kits for a two axle trailer correct?

[2naEagle]

If you do not have any bracing on the front and back then yes. I only had to add one because I already had extra bracing on front and back.

[2naEagle]

Performance Crossmembers by MORryde - MORryde Products

Check out the morryde site.

[Magnolia Tom]

Originally Posted by Marcm157

Decided to pull the trigger on a wet bolt upgrade and at the same time want to add the MorRyde CRE3000 equalizer. I have Lippert Axles. Anyone know of any reason why the CRE3000 wouldn't work? All documentation I find is very generic.

I can't see not doing it while I have suspension apart for wet bolts but just want to make sure it's compatible.

I have lippert axles on my north point and it came with LRE3000 from the factory. I added the upgraded shackles and wet bolt kit along with the x-factor brace. No issues


Sent from my iPhone using Tapatalk

[Marcm157]

Thanks for the replies - I'm looking into the bracing but the shackles, wet bolts and CRE3000 are a definite...

[2naEagle]

Originally Posted by Marcm157

Thanks for the replies - I'm looking into the bracing but the shackles, wet bolts and CRE3000 are a definite...

It's just always easier to do it all at once.

[Marcm157]

Originally Posted by 2naEagle

It's just always easier to do it all at once.

Agreed! It is a pain to jack and brace these trailers. I decided to do the CRE3000 since the suspension will be apart already...