Window gasket pulled out by slideout seal.
On our first trip out with our Eagle HT 26.5 we noticed the rubber gasket (between the glass and frame) on one of the sides of the slideout was 1/2 way out and hanging down.
It wasn't hard to put it back - it just presses into place.
The problem is - it apparently wasn't hard to pull back out either - because the next time the Slide went out - the seal was pulled out again.
Should have taken some photos but the rig is back on the storage lot a few miles away so I can't now.
So - I'm thinking about glue. I don't want to be too agressive because I might need to change it someday. So I was thinking silicone exterior sealant applied in moderation in the track before pressing the rubber gasket/seal back in.
What say you oh wizards of Jayco maintenance?
__________________
Buddy Ray - Atlanta
---------------
Jayco 2016 Eagle HT 26.5RLS
Ford 2016 F150 Lariat, 3.5L V6 Ecoboost
Max Tow Pkg, 36gal tank
Reese Sidewinder and Reese Titan 16k hitch
|