2009 Embark TV & Power Awning Questions
I had a fairly major electrical problem (started with a failed automatic power transfer switch) that caused multiple problems. After the new switch, I've replaced the inverter and that made 115VAC appear where it should. The microwave blew a diode, the satellite box completely died. Those are fixed.
The remaining problem is the power awning doesn't power up - no LED illumination on the controls. Carefree got me the service manual which points to a (probable) blown fuse in the control box.
I "think" the control box is behind the front TV, since the control wires from the awning itself enter the motorhome at the far upper right front corner, just above the TV and near the controls. I will gladly inspect the (probable) fuse if that's correct. Your inputs very much appreciated.
The related problem is that I cannot remove the TV to find the control box. The wooden trim comes off pretty quick and the TV is hung on two brackets I can see. There is not enough space for me to reach behind the TV to (possibly) unlatch it. Again, your help is appreciated.
Naturally, this is all taking place far away from home in a cool mountain locale!