Our 2017 Eagle TT has the Xantrex 1000 inverter in it to run our residential refrigerator, and when we got back from the store last night, the inverter panel was flashing an E05 error.
After reading this forum, I turned off everything I could, disconnected shore power, flipped the 12v cutoff switch, and disconnected the ground wire to the inverter (a LOT easier to get to that than the ground directly on the dual battery setup I have).
Waited ~ 10 min. and reversed the process. The code is gone, and everything is back to normal.
During this, I noticed that it looks like EVERY outlet in the kitchen slide is going thru the inverter which includes the residential refrigerator, the microwave, the TV (and our satellite equipment behind it) as well as a Keurig plugged in and sitting on the counter next to the stove because they all became active once I reconnected the ground, turned off the cutoff, and before I reconnected shore power.
I am going to check with Jayco because all I really want thru the inverter is the refrigerator and nothing more in the event of a power failure.
Chalk up another one for this forum and it's experienced members. Great to have such a resource at one's fingertips.
2015 GMC Sierra 2500HD SLT 6.0L SRW
2017 Jayco Eagle 330RSTS, Meadow, Residential Refrigerator, Girard Gen 3, Dual AC, Dual awning, Maxxis 8008, Table/Chairs, Dometic Elite Toppers (3), Blue Ox BXW2003, TST507RV TPMS, Level Mate Pro.