Leaking Water Valve

[atom]

I have a 2009 Greyhawk 31fs.
The problem is there is a leak in one of the valves on the water valve center. I would like to replace the valve. I can remove the screws on the control center plate but I cannot see how to detach the plate without removing the rivets which seem to be attached to each valve. Is this the only way to remove the valve or am I missing something. I also do not want to damage anything by removing the rivets Thank you

[norty1]

Can you see behind it to see if anything is holding the valve in besides that rivet? I can look at the back of mine and all the pex tubing is back there and would have to be accessed in order to change that valve.

That pop rivet is easily removed by the std. method of drilling it out.

[Cactusogre]

You probably should post this in the Class C forum.

This forum is primarily for questions on the use of the forums.