Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-04-2016, 05:29 AM   #1
Member
 
Join Date: Sep 2015
Location: Sag Harbor
Posts: 56
Levelling Jacks GreyHawk 31 FK

I noticed that a pin above the bottom plate on one leveling jack is bent although the jack will still raise and lower. When I turn it, it gets pushed up against the piston base, then makes contact and the "jack-down alarm" shuts off as normal. I do not want to bend this pin back to a normal straight position for fear of breaking it. Is there someway to correct the bent pin or replace it? Thank you!
JosephC is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 02:04 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.