2008 Jayco Seneca. I have 110 power to the breaker panel on shorepower and generator power but no power to AC's, lights, and receptacles. I can hear the transfer box switch after the generator comes on. The invertor does not appear to be doing anything. Is there a master breaker I am not aware of?
I just re-read where you have an '08. I am not too familiar with those. Do they even have a whole-house solenoid or are they a manual disconnect switch?
I am revising my thread. I do have power at the receptacles. I think it is a 12 volt issue. I tested the 12volt panel and it is dead. I am going to check on a fuse or solenoid coming from the house bank.
Memphis02 thanks for mentioning the 12volt side. I think I have a problem with making a mountain out of a mole hill. I must have accidentally clicked off the 12 volt disconnect. It is a toggle near the floor by the door. Clicked it back on and all is well.
Memphis02 thanks for mentioning the 12volt side. I think I have a problem with making a mountain out of a mole hill. I must have accidentally clicked off the 12 volt disconnect. It is a toggle near the floor by the door. Clicked it back on and all is well.
Those are my favorite kinds of fixes!!! Glad you're back up and going!
Linear Mode
