Quote:
Originally Posted by katiedog
Could someone post a Pic of these seats installed.
I am concerned that the length will limit the adjustment
of the Passenger seat.
We would love to try these in our 31DS if they work.
Thanks
|
Katie - I JUST finished installing the 58" recliner from RecPro (got it in ONE DAY after I ordered it, but then again I live in the Indianapolis area in the summer and the factory is in N. Indiana).
Firstly to calm your fears, the unit actually leaves enough room for the passenger seat to be fully pushed back (which you could not do with the jack-knife). You still will not be able to recline fully however. With the recliner in the upright position, there is still sufficient walking room in the RV with the table slide in, but you do not have room to recline without running the slide out.
The unit goes together quite easily, the only hassle is figuring out how to attach it to the floor. I mounted it to a piece of 1/2" plywood and attached that to the four bolts that hold the seat belts. Even though we will probably never use the belts, I left them attached and they lay behind the recliner on the floor.