Looking an my Jensen AV install manual - I see no fuse dedicated to the rear camera.
Sounds like a connection got disconnected or the rear camera died. On my Jensen head-unit, the video cables from the cameras go into a harness on the back. I'm trying to think of ?easy? ways to debug.
If yanking the head-unit out isn't too much trouble, you could do that and see if a connection came out. Or swap Camera 1 (Rear) and 2 (Side) - if you get video then you'd know the rear camera is fine as is the wiring between the harness and the camera.
If you didn't get video, then maybe you'd start debugging from the rear camera and move forward.
I hope it's something simple!
|