I have a 2011 Greyhawk 31DS with side cameras. I have not paid much attention to them because I would rather put my trust in the mirrors but I noticed when driving it the other day and signaling to turn right the camera showed what was on the drivers side and when signaling to turn left it shows what's on the passenger side. Would the wiring be crossed and mirrors hooked up backwards? If so is there an easy fix that I could do? Thanks in advance for any help.
Should be a simple swap behind the radio. Sounds like they swapped the signal wires. But, there may be a set up menu for this as well. Contact Jayco, talk to a guy named Vin. He can help you diagnose it and give you the specifics and diagrams for your model.
Should be a simple swap behind the radio. Sounds like they swapped the signal wires. But, there may be a set up menu for this as well. Contact Jayco, talk to a guy named Vin. He can help you diagnose it and give you the specifics and diagrams for your model.
I have heard from Jayco and if anyone has this problem all you need to do is remove the panel directly below steering wheel. There is a controller module with connection marked 1,2 and 3. Connection 1 is for the rear camera and 2&3 are for the side cameras. Just switch connections 2&3 to solve the problem. I have delt with a person name Vinh Le in the motorized warranty dept at Jayco on several occasions and he has always extremely helpful and very prompt getting back with me.