Table make into a bed

[stans02]

My 26 ft jayco I purchased a few months ago has a small table like most have. The seller said the table can be made into bed. Can infact this be made into a bed? If so just how can it be accomplished? What size will it end up. Thanks Stan

[Denise]

70"x 38" broke down from dinette. An adult and child comfortably slept here. See my signi. I'm camping right now if you need more info

[SmokerBill]

I have a 26BH. All you need to do is remove the tabletop from the legs and remove the legs from the floor mounts. I store the legs on the floor between the dinette seats. Then set the tabletop on the ledges that are under the outer sides of the dinette cushions. On mine there are small round posts on the ledges that the curved tabletop edge fits behind. Then the back cushions go onto the tabletop. Viola! Instant bed.

[RoyBraddy]

I have never dropped the table in a JAYCO 26 footer but like the other post said just remove the two table legs shown here in this JAYCO 26RLS model and the table top will then rest on the seat ends and make a pretty big bed. All of the cushions used here will fill into the bottom part of the bed. We do this all the time in our OFF-ROAD POPUP setup. Our table has VELCRO on the bottom and holds it in place on the seat ends. I call it a lounge bed. Very comfortable for the two of us. Looks like this setup shown in this photo will make a very comfortable bed with lots of elbow room...


sample photo from google images

It looks like this setup would make a great LOUNGE BED to stretch out in and watch HDTV.

Roy Ken